Search results

I installed a Midland MXT275 and ran the power through my Voswitch. I did a watt output check with the vehicle running and on ch 1-7 got 5 watts, on ch 15-22 got 11 watts, on ch 15-22 repeaters I got mid to high 7 watts. SWR ON 1-7 is 1.0, on ch 15-22 is 1.01, and 15-22 repeater is 1.1 to 1.5. I...

Can you ground a CB antenna in the same spot where an electronic device is grounded?

GMRS and CB being installed on Friday. I ordered the Midland MXT275 bundle from CoolTech which included their antenna mount and ordered an additional mount for the CB antenna. I want to use the front cowl bolt location to mount the antennas to keep them away from the windshield frame just in...

If I am running a GMRS radio, mostly likely going to be a Midland MXT275 15w, with a CB; can both be on and not interfere with the other if the antennas are on opposite sides of the vehicle? Also, does having a CB antenna close to the AM/FM antenna get any interference if the radio is not on AM...

I've been pondering the idea of running a CB and GMRS radio. I have some road trips in mind for next year and want an extra layer of communication. The CB I am looking at is the Midland 75-822 and GMRS is one of the Midlands, MXT575 or MXT275 with a ghost antenna. In my research I found the...

What is the part number for the foam tape that goes on the freedom panel? Specifically the front passenger side. I looked at all the diagrams and the only thing that comes up is a foam block. The pic is of the drivers side. Im trying to fix a leak myself and my passenger side one is messed up...

Im thinking about getting a 5 spot ground block for all my lights and winch isolator. 5 negative wires on the chassis ground looks like a cluster. With everything on at one time im looking at 25amps max, probably be rare all on at one time. Would 10 gauge work?

Can someone with a Willys that has auto, tow package, and hardtop post the part numbers for the front and rear shocks? Someone is selling brand new shocks for $50 and the 2.5 hour drive might be worth it. I have also seen plenty of shocks that came off a JL Rubicon.

Has anyone went from 245/75/17 to 255/75/17 and not reprogram for tire size? I had a JL and went from 245 to 255 and the speedometer was dead on. It was a 6spd so obviously I didnt have to worry about shift points. Anyone do the same upgrade and have any problems with the speedometer and shift...

I have a Sport S with Max Tow. As of current with steel bumper and winch as measured in the center of the fender flare bottom lip, the front sits at 34.5" and the rear at 37. Prior to the bumper and winch the front was 35. I ordered brand new 340 and 343 front springs. From what I have read...

Would the limited slip carrier that comes in the rear D44 max tow work in the front D44?

From diagnosis to repair time, how long have you waited for the parts to come in? I looked at my right rear axle and it appears the leak has gotten worse. It must not be that big of a concern for Jeep to keep the vehicle on the road while waiting for parts. Im concerned enough fluid will leak...

After I go left or right in reverse and pull forward and the wheels are straight I hear and feel a light grinding noise from the front left wheel. Kind of feels like the ABS is pulsing briefly. The sound is there cold after sitting and after being driven. I read the posts about the FAD but it...

I have been researching a lot of winch plates. Some only bolt up to the inside of the frame rail where the re-enforcement brackets mount and others mount to the same location and then also bolt up to where the skid plate plate brackets mount. I guess technically it would be 4 or 6 point mount...

Contemplating buying the knock off steel front bumper and I noticed the knock off does not have the crush cans. How big of a deal are the crush cans? Quadratec has the part with the crush cans where the tow hooks bolt up to.

I am eyeing the Mopar steel bumper and the fit around any winch looks kind of tight. Has anyone had any issues with their winch getting rained on? I'm guessing a IP68 rating can take being rained on and not have any problems?

I have a 2021 Sport S Max Tow with 350 miles. Seems like when the trans is in 5th gear and I have a gradual slow down, even a coast, then slow to turn or stop, the trans is hesitant to downshift into 4th. Its like its thinking about it and then does it. Not a rough downshift, just kind of a...

What is the maximum weight limit the factory running boards can hold?

I have read a lot of threads and I am wondering why I see some people put the .75 spacer on the back and some don't? I don't want to do the same work twice. Also, those who have put on Rubicon front springs which spacers did you use, just the 1 inch and/or the .5 inch as well.

Has anyone with door entry guards that go over the lip have water come in during a water crossing?