Search results

I am replacing the passenger side axle seal and upon removal of the FAD, I removed the intermediate shaft and noticed quite a bit of play in the bearing. I was trying to clean up the axle tube and change the diff fluid when I noticed a lot of play in the bearing. I made a quick video for...

First off, Merry Christmas to you all! So I got the Metalcloak LCAs as a gift along with the Trackbar/Steering Box brace but this post pertains to the LCAs. My current setup is is the MC 3.5 TDR kit. I am using the MC UCAs (Set @ 20”) and the Mopar Lift LCAs and my caster is 5.3/5.4 per that...

So I ordered a set of Cavfab diff covers and will hopefully get them installed this weekend. I reached out to Cavfab on fluid quantity since their website didn't specify how much oil to use. They said they didn't have an exact amount but recommended I fill to just below the fill plug. I know...

I received my 1350 Front Adam's Driveshaft this week and installed it but now I have a serious vibration when in 4hi. I know I wont drive around in 4hi all the time but I would should be able to use 4hi when I need too but since installing the driveshaft I am concerned and cant figure out what...

Anyone looking to part with their JT RainGearCover? I'm about to pull the trigger on ordering one but figured I would check here first.

I took the Gladiator to the dealer last week and they called me to tell me that my rear driveshaft carrier bearing was bad after 48K miles. Of course, they gave me a hard time about my lift causing the issue which I installed a 3.5" MetalCloak lift back at 4400 miles. I think I tore it up on my...

So I was thinking and wondering if anyone has ever drilled and tapped the lower ball joint area to insert a set screw to help keep the lower BJ from coming out when breaking an axle shaft? I know BJ delete keep this from happening but other brands do not support the lowers from coming out of the...

So the last time time the dealer replaced the front axle seals they fubared my front fill plug. I’m going to have to drill or chisel it out! I am trying to find the thread size so I can get a replacement. Lots of websites have conflicting information as to what the proper plug is. Anyone know...

Decked just released their new Decked System for the Gladiator! I will never have any money at this point! https://decked.com/products/drawers

So I installed A truck toolbox early this year and recently I started to notice the bed rail covers were starting to collapse. Today I decided to pull them and see what I could do to beef them up. The area I need to beef up is about 1-1/2” wide by 22” long and 3/16” deep. I can’t decide if...

I had the dreaded dead aux battery over the weekend and decided to delete the aux battery after replacing the main battery Sunday afternoon. I put the new battery on the charger overnight however this morning the Jeep started fine but now my voltage is only showing 12.6 on the instrument...

I’m looking to replace my factory steering components and having a hard time deciding whose system to run! I love MC but know there are other systems out there. I live in Florida so very minimal rock crawling if any at all! Is the aluminum the better option over the steel? Or would the steel...

I had these installed on my JTR for about 6k miles and decided to go with a taller spring. Asking $200

I was out earlier tonight and noticed my Fox Steering Stabiler is making contact with my Tie Rod assy. When full lock to the passenger side. I'm using a Clayton SS relocation bracket anyone seen this before? I want to upgrade my Tie Rod and Drag link in hoping it gives it a little more...

I currently have a 3.5" MetalCloak lift on my JTR and the jeep has about a 1.5" rake from front to back. I sold the Teraflex leveling kit (regretting now), so now I'm looking to get another one. But my question is, can I use the TF kit in conjunction with my MC lift? I know MC utilizes a coil...

I’ve been trying to get my steering firmed up and have had several alignments and tonight I think I got it all dial in with one exception! The Steering Angle Sensor is off. With the wheels straight and steering wheel centered, I noticed on my JSCAN that the angle was off by 3.5 degrees. If I...

Anyone have any idea who or what company builds the steering gear box for the JL and JT? I have 2 boxes torn down and need some replacement parts!

My Jeep club is planning a 4th of July Weekend trip to Stony Lonesome OHv park in Alabama ana I was wondering if anyone had some GAIA files or map files they could send me? I heard the local map is not very desirable.

I just ordered a set of TF Ball Joints for my Gladiator, but now I have local Jeepers telling me I should have gone with something else! Did I make a mistake? I liked that they have a Lifetime warranty, rebuildable and honestly trust and like TeraFlex!

Brand New in box, MetalCloak Front adjustable Track Bar. Asking $180 shipped.