Search results

Sorry, my follow up didn't post. Here goes.... One of the springs is bent/damaged and they have about 70,000 miles on them so I’m going to at least replace the rear pair if not all 4. But I am happy at the 2” mark so just springs for now.

I have a 2020 gladiator with the 2" Mopar lift. I like the way it rides and I tow maybe half time which I use airbags for and am happy with that. I need to replace the coil springs now. I am not interested in going with a heavier spring. I see Synergy which maintains a factory spring rate and...

To follow up, first Thank you for the education. The symptoms really seemed like it was not able to hold pressure which goes back to your first suggestion being the expansion tank cap. I really wanted to pressure test it and the system but being on the road I was unable to do that. I did a...

I replaced the cap a few years ago but that would make sense. I was wondering about what a failing thermostat would look like. It is running great except for this symptom. Two dealers tried to tell me this was normal even though it has never done this in the almost 6 years I’ve had it. They...

It’s to the top of the tank. Well above the full hot mark.

With and without trailer at around 80 degrees. Today at around 70 degrees 6000 ft unloaded. The symptoms don’t vary much but the high temp did not go over 225 that I saw.

2020 Gladiator - My coolant level has always been good. Cold level on tank then somewhere between there and full hot when warmed up. Now the tank is filling up to near full when running and then back to the cold level when off and cold. The idiot temp guage does not move off normal when warmed...

I ran mine down the inside of the frame and terminated them with. https://a.co/d/e00k17w

I changed my trans filter and fluid. It only took about 5 quarts. I saw a youtube that said 6 quarts. I was wondering what other folks results were. I already recycled the oil so I don't have that for a reference.

JCR Sliders good condition. Just add paint or powder and they'll be like new. Lake Elsinore area local pickup only

Stock JT Wheels with lug nuts and locks - Lake Elsinore area, local pickup only

Hi, reading up on changing the plugs on my 2020 glaadiator. Did anyone doing this change the Plenum seals. I'm just trying to get everything I might need before I get into it. I was also going to change the PCV valve based on several other recommendations. Thanks in advance

Wow! very good resolution. I have mine on order. I tried the Garmin solution and it's expensive and not nearly this good. Thanks!

Wow, that looks great! Do you know is it 720p or 1080? How does it compare to the rear?

I use Lamin X tailgate protector https://lamin-x.com/jeep-gladiator-20-tailgate-guard.html with a https://overlandgearguy.com/products/jeep-gladiator-tailgate-trash-bag?_pos=1&_sid=f6ba8bbb0&_ss=r expensive but it has been a great solution. Many miles and much dirt with no scratches and...

The last time I bought a 68257030AA it was $24. Less than a year later the cheapest one I can find is double that. Anyone know what's going on?

No idea what an AAL or a FAK is but good to carry a fire extinguisher. A picture would be nice for the acronym lacking.

This is great! I am going to do this too. Do you have any photos and/or advice on the camera mount?

I have your exact setup. There seem to be several part numbers for the Airlift Ram 1500 HD. Do you have the part number you used?

Looks good. How do you like that bumper? Does it fir with the factory hitch and fender rails?