Fox 2.0 IFP Stabilizer Shock installed.
And as some have mentioned. The passenger side mounting bolt from the factory is incompatible with the hole on the Fox shock, at least on my application.
So I went to Home Depot and bought a 1/2 2- 1/2 in fine thread Carriage bolt and matching nut...
I spent the better half of Saturday afternoon trying to install my tri-fold bed cover from Rugged Ridge.
Main problem was the m6 bolts that came with the kit, didn't fit the holes in the bulkhead nor the holes on the side of the bed where you cut the plastic pieces out.
Those bolts are actually...
I took my time and sourced what I would be using the truck for.
And came up with the General Grabber ATX.
Smooth, Quiet, and Aggressive looking.
In my opinion, it is, and has always been a great tire brand.
It doesn't need to be blown out of proportion. But there should be some "accountability."
Perhaps this was done before, or not. But nevertheless, this will perhaps help her to be more careful in the future.
Once they are aired and mounted. They will more than likely measure in at 33.5.
Like my General Grabber ATX, and 17x9 set up.
I have the stock 3.73' gear set (Ecodiesel), Terraflex 1.5 level,, and the truck pulls the same as it did with the stock 275/55-20'
Some Steely Dan, Supertramp, Van Halen, Joe Cocker, Triumph, Billy Squier, Steve Wonder, Spinners, Whispers, Donald Byrd, Macy Gray, Eric Roberson, Cars..
I'm all over the place.
I grew up with a very Eclectic Taste of music.
Primarily though,,
A lot of Jazz, both straight ahead and...
FOR SALE,
20x8, 5x127 +44 offset Factory High Altitude wheels and 275/55-20
Bridgestone tires.
Lug nuts and center caps included.
No curb marks,
No TPMS.
No tire repairs or damage, in excellent condition.
Murrieta ca area.
Sorry, no Shipping
$900
https://ude.bmwusa.com/
Just in case some of your are interested....
I attend this every year, as a BMW Owner and Lover.
And thought some here might enjoy the " free " Auto Cross Portion.
Spots go quickly, so,, Sign up fast if you are interested.
Before, and After pictures of "Baymax";
Teraflex 1.5 level kit,
Factory Fox Shocks,
17x9 -6 offset Mayhem "Flatiron" Wheels,
General Grabber ATX
315/70-17.
Running 34 frt and 32 rr,
PSI , Tires measure 33.55 inflated, and That's what I entered into Tazer for speedo correction.
I can Honestly say that with my 35's and wider wheels.
I hand calculate 26.6 mpg.
And prior to that, in stock form, I was getting 28.7 mpg, at 70-75 mph highway.
This is with HPR diesel from Propel. This engine performs great on this fuel.
https://propelfuels.com/our_fuels
Let me set the record straight.
I am not saying that my fuel tank is larger than anyone else's.
But, If by some weird chance. During my build, an overworked employee, put in a larger tank fuel tank, so be it.
But the manual clearly says 18.3 gallons + 5 for the def.
My point is, once the air...
No,
There's nothing mechanically or physically wrong with my vehicle or fuel tank area.
*Diesel engines do not have vapor canisters.
This is not my first diesel vehicle, I've been running diesel for the last 25 years.
I've always been able to get extra fuel in the tank by slowly squeezing...
Terra Flex level 1.5, Factory Fox Shocks,
Mayhem "flat iron" 17 x 9 -6 offset, 78.1 hub bore
Used 78.1 to 75.1 hub rings to keep wheels true.
315/70-17
General Grabber ATX
It's Not L.A, But in my opinion, it's well worth the drive.
I had Rubicon fox shocks and Terra Flex 1.5 level kit plus alignment, Which they set better then it was from the factory. All for $600.
https://socal-suspension.com/
Now here is the interesting thing.
52 miles into the drive after fueling up.
Strangely,, The range started to show 468 miles to empty.
And here's what it showed when I reached home.
128 total miles from fill up;