Search results

Standby, will try that. Just disconnected N1 to try to test, car shows no power.

Main battery currently reading 13.11 V when main connections are disconnecting. Will try to get the posts next.

W What do you mean by blown? What’s best method to use voltmeter to check? Red to post, black to main ground?

Indeed I did switch it to AGM mode.

To clarify what you want, hook up my voltmeter to each of those posts with the red with the black lead going to the main ground?

When you say the fender ground, are you referring to the black main battery terminal?

Isn’t N1 under current when everything is connected?

The truck starts up no problem, but it’s reporting only 11.8v on the on-board system. Both batteries are brand new, I only had time to charge the big battery as high as 80%+ using the following...

I made it two blocks down the road

wish I had read this earlier, I did the AUX battery first (positive, the neutral) then the N1 connector on the fuse block, then the main battery (positive, IBS, neutral). The truck started, about to drive it about 2 miles home. Still some lights on the dash, but I’m hoping they resolve as the...

Right now, the truck has been without both batteries for a couple hours, should I still disconnect this cable after I reinstall the batteries and then reconnect it a few seconds later?

Would something like this suffice? https://www.harborfreight.com/4-amp-fully-automatic-microprocessor-controlled-battery-chargermaintainer-63350.html

So I drove to and from Richmond VA from Frederick Maryland over the weekend with no issues, and last night when I got to a stop light my start/stop worked for the first time in months. I thought, "Huh, I guess my long drive finally charged the aux battery." Took my foot off the break, and the...

So I’m in the mid-Atlantic and my hose bibs are off for the winter, so my personal power washer was out. It was in fact just particulate matter on top of the liner, so I went to a local car wash, fed in $3.50 worth of quarters, and went to town with the high power rinse function. That seems to...

I had to carry something in my truck that the other day that upon tipping it in some rusty water fell out and ran down my bedliner. I was wondering what the best method would be to remove the stains from the bedliner? I have CLR, but I wasn’t sure if it was safe to spray on. Thanks for any help...

im glad you said something, im certain my jeep was build end of 2020 as a model year 2021. Any reason why this is? Wonder what the date limit is since I think their truck is an 2023. I confirmed it still has sensors.

Thanks very much for the info! This being my first Jeep Jeep (I won’t count my 2015 Cherokee) I’ve never been in a position to so easily buy takeoffs.

I’m buying a set of tires from my daycare provider that they took off a 2023 Sport model with a couple thousand miles on them. I know they’re both five lug patterns, but would any stock tires from the model range work on any other model in the range? I’m sure it’s been asked before somehow but...

I’m afraid I didn’t.

not trail related, but go get a burger at Milts Stop and Eat. Darn good.