Search results

Here are a few pictures, I would call them and ask for Grant for help with any special mounting options, he has access to some Gladiators so I bet he could put something together for you.

It comes with its own rail that sits on top of the bed plastic caps to seal it (i also sealed the stock caps with a heavy silicon as they were allowing water to seep in) so it doesn't really interfere with the inside of the bed and likely not the Jeep rail as far as i can tell. I did not order...

I wouldn’t say hindsight is 20/20... but then again I think it’s a serious enough surgery that you have to weigh the pros and cons and be willing to live with the cons. I did just that and I’m comfortable with the results but it wasn’t a walk in the park, I probably would have done 1 at a time...

1. Set your expectations that there is no perfect vision, complications do happen and so if you have good vision with glasses/contacts you may or may not get close to that with a laser. 2. Ask for a “mock” procedure on the actual table before you go through the real thing so you know what...

Ive used these Remington 82 Quart totes for last 5 years for trailer/truck storage. They are lockable and keep my motorcycle boots/parts/tools dry on long hauls with a true weathertight seal. I’ll have to photo them in the gladiator bed. They also have a nice strap/groove system to synch them...

Agreed, yes it stores underneath the bed cover “undercover mode” in a velcro secured pouch Cover Open: Cover Closed: I spent a few minutes trying to smooth out the topper material itself for appearances to have a boxier look but it’s infinitely adjustable on each side with its velcro vs...

35 BFG KO2 + Method MR305 and 31 PSI (chalk)

I left a V8 and i guess i did it at the right time because this little V6 feels pretty peppy at lower speeds (and on bigger tires) granted its 14 years newer. It's all about perspective. 2006 Tundra Limited - 271 hp and 313 lb/ft of torque @ ~5000lbs 2020 Gladiator Rubicon - 285 hp and 256...

Yup, I usually use Gpscity for all my bike needs but found this on the main ram mount site: https://www.rammount.com/part/RAM-DT-204-TRACK-A12U

Pretty annoying but finally figured it out, nothing to do with Uconnect.

That’s true, I haven’t spent any time adjusting the canopy to make it more flat/solid looking, there seems to be lots of adjustment with the bar location and the windows fit front and rear to bring in any slack. I made some initial adjustments to the factory mounted locations to gain about an...

White Rubicon, Ordered 10/15 arrived 11/29, picked up 12/6. New to Jeep but getting ready for dirt! Thank you Eric, Kenneth and Kyle at Mac Haik Georgetown!

New Fas-top, I’m digging the 2-1 option, don’t always need so much storage and makes it easy to put the bed back to use for those dang motorcycles. The hardware was also top notch, still working out the placement of the rails, but both the top and the cover use the same quick connect bracepoint...

Fully deployed fas-top, seems to be an awesome 2-1 system. And a new ram mount, get to re-use all my “on-bike” gear!

This is where it starts. Rubicon build for the southwest. Inspired by many years of adventure motorcycle riding, I’m ready to upgrade to a rig that can go to the same places, transport all the necessary moto gear, and hopefully be a decent rescue option when things don’t go as planned, so we’ll...

It might be related to the manual transmission option. Googling up RAM trucks they also have that option for manual trannys, so may be a carry over of that design.