Seriously though. Could it be a cavitation issue? Fluid viscosity? Ambient temperature? Fluid reservoir level? Air pockets? The engine mounted PS pumps changed rpm with the engine. Is the electric pump constant velocity/pressure?
The listing of the individual gearing ratios is a way of visualizing the engine crankshaft/transmission input shaft rotation compared to the transmission output shaft/driveshaft rotation. The first gear ratio of 4.71 means for every turn of the output shaft, the engine crankshaft revolves 4.71...
Pretty useless in any country, IMO. In the motorcycle world these are farkles. Dress up items with no useful purpose. Eye candy. They will sell like hotcakes nonetheless.
Did you verify equal pressure with a mechanical gauge? The wife's Cherokee had a leaky left front tire and a 10psi difference caused a very determined pull to the left. It was worse when the brakes were applied. Are the balance dots aligned correctly. Shops around here I have tried do not know...
Nice looking Z! I want one of them but the wife would never let me hear the end of it. (5 bikes in the shed now) So how does it go? My first Kawi was a 400cc two stroke triple in '75, then a GPz550 "81 and a GPz 1100. Also 81.
Not trying to cause insomnia but were the wheels reinstalled correctly? From personal experience working at various shops, most of the folks spinning spanners are nothing more than parts changers who run their air tools at max pressure without using a torque sensitive wheel nut tool. You may...
Quadratech has an induction hood with a rear facing opening with a raised lip at the lower edge that prevents rain from entering. Paint to match. My YJ had the rear facing scoop for the cabin air vent at the base of the windshield where there is positive pressure. Very effective. Facing...
To my eye, these look nice and certainly appear to be well made but I ask about the actual effectiveness when at speed. There is a negative pressure area there being that far back on the hood. It makes more sense to have the opening facing the windshield to aid in the extraction of hot air at...
If you are coming off a rack and pinion equipped vehicle, you will notice the difference from a recirculating ball type. Rack and Pinion is not as robust and offers less wheel turning range. The RB system was chosen for a reason. Glad the Trailbreaker was never designed to be a spots car.
I have read many posts from the net about the steering being vague or wandering . It is my understanding that a recirculating ball system is much stronger and offers more steering travel than a rack and pinion. Please Jeep, don't go changin' what works.
Definitely not trying to disparage any one. I have spent almost 50 years towing and launching up to 20 ft fishers and runabouts with a Pinto wagon, F150, Galaxy 500 etc. I cannot recall ever needing to back up or pull forward with an open door. Wifey says I can "back a snake up a garden hose"...
I learned to drive partly by watching pop. When I asked him why, he said it reduced the starting loads on the engine and electrical system. I learned to repair USAF electronics in the vacuum tube era.(ARC27/34) Kind of like keying the transmitter before applying input power. Zap crackle and pop...
My take? I ride motorcycles. A lot. My 5 are a mix of drive systems and engine configurations. Some 6 speed, some 5 and one 4. A reversed shift pattern and on the right for that one as well. Startup is the same for all-Fuel, ignition, neutral, engine cut off switch, choke/clutch and scan the...
I have overhauled dozens of engines and would recommend Chevron Techron every oil change. 1 oz./gal. Best to do that tank around town with periods of shutdown. Steady highway cruising does not allow the cleaner time to sit and soak into the deposits that build up. Lucas fuel system cleaner works...
Last week I had the windshield in the F150 replaced, at home, 180 clams. Safelite was over 300. USAF veteran company bonded licensed and insured. 1000 for the rear? Ouch.