Search results

If you scroll back a page you can see some pictures and comments on the Gray Overland

I have the 3" kit on my Overland right now with 37's and an extra 1/2" spacer on the front coils. I haven't really flexed it out but I can tell you that the only real issue I have is that my 5" back spacing on my wheels is not enough at the tires rub the lower control arms just a little. I put...

Sorry to ask so many questions but I placed an order for the 1.5" correction pads today and started thinking.... There's not much info out there on the install with the bump stops so I thought I would ask. When I pull out the original correction spacers that come with the lift and add the new...

I forgot to mention....I added a 1/2" coil spacer to the front to make up for the heavy steel bumper and winch. Still has a small rake and I could use at least probably a 1.5" spacer to level it out. Just don't want to affect how nice it rides now by throwing off caster or anything else :)

3" kit with .5" spacer added to the front on an Overland. 37x12.5R20's with 5" back spacing. Front still sit's about an 1" lower than the back with the steel bumper and winch. Looking to add about 1" more to level it out.

I just installed the lift on my Overland about a week ago. Looks and rides amazing! I did have to add a couple of washers to my steering stops because my tires were rubbing my lower control arms due to the 5”backspacing of my Fuel rims. It’s not bad but I’m thinking of adding 1” wheel spacers...

I know this thread is a little old but I'm wondering if you ever got your airbag warning light issue resolved? Mine started coming up with about 200 miles on my Gladiator and now with 650 miles it's starting to throw the Check Airbag Sensor (code B002013) light about every 10-15 minutes and...

Purchased my Overland 6 weeks ago and right around 200 miles I started getting a random Check Air Bag Sensor (B0020-13) light. It would come on now and then and clear itself within a couple of minutes. But now that I have about 650 miles on the truck it comes up more frequent and stays on...

Any suggestions or recommendations for a 1'-1.5" coil spacer for the front? I have the 1/2" T Flex spacer in the front now and I'm still sitting about 1" lower due to a heavy steel bumper, winch and lights. I don't want it taller than the back but I would like it a little more level than it...

That's exactly what it was! I stopped greasing after I read the the zerk fittings were pregreased and "assumed" all the zerk fittings were greased. You know what happens when you assume.....you get squeaks. All better now, thanks!

Great question.....I was going through putting some grease in all the zerk fitting and saw that it only took a tiny bit before it started coming out. I thought I read somewhere that they were pregreased so I probably stopped after greasing the control arms and other fittings. I'm going to run...

Curious if anyone else had any squeaking coming from the rear end when doing light stretching? Any tips or tricks? I made sure the springs were seated correctly when installing and it’s quiet on the road but I’m getting some squeaking when just going over speed bumps or curbs. Only about 100...

Update: Cleared the code 3 times, turned off the ignition and did a short little drive each time before the Airbag light would come back on. Sometimes it would come on before I made it out of the driveway. The fourth time I cleared it, unplugged the battery and let it sit over night. In the...

So I just finished my 3" RK lift and just like everyone said....it drives better than new. When I was done I adjusted the drag link to center the steering before I went on a test drive and it felt perfect and the steering wheel was straight as an arrow. Went to pull it into the garage a couple...

@Rock Krawler Suspension I am getting ready to install the Rock Krawler 3in Max Travel Suspension System - Stage 1 kit on my Overland this weekend. I don't plan on doing any crazy rock crawling (yet) but I wanted to start with a good quality base lift and grow from there. After looking at what...

I ordered the RK 3” kit for my Gladiator just over a month ago. At that time the installation instructions online said to use RK 000 grease during installation so I ordered a tube from Northridge along with my lift kit. Now when I go online and read the latest directions the newer kits after Jan...

@Rock Krawler Suspension Just curious if there is a back order issue on some of the suspension parts for the Gladiators. I ordered the 3" Max Travel Stage 1 Kit a couple of weeks ago and received most of the parts right away. I've been waiting on the front track bar, front control arms and...

I know this post is a little old but I ordered this kit for my Gladiator 2 weeks ago and I'm now hearing some of the parts are on back order for possibly 2-4 months! I have everything but the front track bar and control arms along with the sway bar disconnects but it's enough to not allow me to...