Sponsored

Search results

  1. 2023 Jeep Gladiator Problems .looking for any pointers

    I'd also look around the engine bay where the majority of wiring goes to the BCM. Maybe some vermin have relocated to your 2023 Gladiator. Look for small feet prints on the black plastic parts. Or bedding material. Definetly sounds like a battery issue. As just a temp troubleshooting, hookup a...
  2. What can we do for you?

    Maybe a pin out of the connector you plugged in to the tailgate lock. Back when Mopar offered LED headlight kit most of the production 20,21,22,Gladiators that didn't have LEDs from the factory, they had to run seperate wires to the Body Control module to get the halos to work. But the LEDs...
  3. What can we do for you?

    Have you looked at Jscan, maybe the Body Control module needs to know what you did.?
  4. Factory hood lock

    Wait I may have miss understood are talking about the OEM hood Latch our vehicles come with and swapping those out for the locking style? If that is your question I didn't read good enough sorry. Like I said in my other post it literally takes zero effort to overcome the OEM style that have a...
  5. Factory hood lock

    Most scum bags stealing your truck won't even open the hood, no need too. Most break the glass on the rear window or passenger side. Then rip out the glove box, access the star connector at the very front connection, so they are on the high and low. Only takes a minute. The hood is really for...
  6. Squeaky drivers door

    I had a driver side and passenger side creaks. Read that thread applied some WD40 with no change. Then I read where someone had mentioned running thier fingers down that seam near the seal and just tugging on it, I shoved both hands fingers in that tight groove and pulled hard, no more creak...
  7. Factory hood lock

    From what I have read locking latches are just a hold over from older jeep model hood latches that would unlock by themself. I've ordered two different locking hood latches and 1. They are easily defeated by simply pulling on them my 2 year old grand son could easily break them. 2. Most require...
  8. New glass.........FINALLY!

    I cracked my windshield on my 2023, (outside of Moab). 2 weeks ago When I made it back to Texas, got a hold of my insurance. Of course I was passed around till I connected to Safelite the designated vendor for the insurance company. I told them I did not want them to do the windshield change...
  9. Factory hood lock

    BOLT makes a jeep hood lock, grill insert wont match most likely but, it'll secure the hood. its affordable,easy install, and will key to your truck key. https://www.boltlock.com/locks/jeep-hood-lock/jl-hood-lock-7032303
  10. What can we do for you?

    Thanks Benny.
  11. What can we do for you?

    Thanks ShadowsPapa, I couldn't find the p/n on my windshield but when I saw your picture I knew why. My inspection sticker was covering it up. That's what got me questioning part number for the replacement glass.
  12. What can we do for you?

    The Dallas distribution center allows pickup.
  13. What can we do for you?

    Mopar (68386743AE),Mopar (68433234AC), Mopar (68433233AC) I believe each of these part numbers can be used but no mention of accustic feature. I'm going to use my auto insurance probably my recent 2500 mile trip has tapped me out. So I pay a deductible ShadowsPapa, I've read your adventure...
  14. What can we do for you?

    Hello Benny, I have a 2023 Jeep Mojave made 12/23. I finally demolished / cracked the windshield and it needs replacement. The OEM that is cracked was actually really good, quiet. So I would like to know are all 6 windshields listed for my Mojave, considered acoustic glass. I know 2 of the 6 are...
  15. AMW 425 5.7L HEMI installed by Rubitrux

    Same here. I bet most folks have never noticed the tiny(or big) foot prints on the dust covered plastic, I spray mine once a week in the winter, and the garrage door goes down before dark,
  16. Receiver Skid Plate

    JTGuy, that looks heavy duty, wished I wasn't pressed for time. I just ordered a Bodyarmor 5136 version from Amazon. Im sure it's no where near as stout as yours, good looking fabrication
  17. Receiver Skid Plate

    Thanks for the advice Jaxmax. Price goes up considerably for the wide plate type. Sad part is I have some old not being used 2" receiver drop hitches. I think I might try and see if I can borrow my sons stick welder and do some modification. Love the " NEVER UNDERESTIMATE AN OLD MAN & HIS...
  18. attempted thief broke my glovebox

    Well, I don't have a Glock. But it will fit a Springfield 4" 1911 with 2 Holsters. It will fit a Colt 3". 357 and holster and it will fit a Sig P229/ with optic and a holster. Not all at once but if needed could easily fit 2 of the pieces and thier Holsters. Leaving a firearm in a vehicle is...
  19. Receiver Skid Plate

    Thanks, the possibility of doing damage to the Hitch would definetly make for bad trip. probably order one tonight.
  20. Oil Filter Cap Question

    Yes sir, MO349 that is the recommended. Ive seen other variants but they go by another part#




Top