Search results

Right after I install my regular Pro-X no limits kit. :sigh: Would have went coilovers for sure had I known. :crying: Was already planning that upgrade from another company but now at least I can stay RK all around

When I installed my kit I didn't loctite any jam nuts for the reason of alignment as well. Took it for an aligment a couple days later. It was all pretty much to spec except the front track bar/drag link. Now that I got it out of the way I'm going to put the truck up on my lift again and break...

Maybe I overlooked that but the kit came with bolts for 1, 2, or 3 spacers and with the shock length I have 2 were determined to be the ticket to get the most use of shock travel. Otherwise, i'm unnecessarily killing 1" of up travel which I find is important in my terrain. I still have the extra...

Got my Evo brake lines yesterday and took the time at the end of the day today finishing up at work to get them installed and swap to my Falcon rear shocks, then forklift flexed it in the back lot to check all my clearances. Should I have any concern for the full compression of the front coils...

Looks like I should be able to make it, excited to test my new suspension that I just installed last weekend. No winch on the JT yet but I'll have a full array of recovery gear aside from that and lots of experience snow wheeling. I've done all the trails around there in the summer, should be...

You should come out with a Chevy Colorado ZR2 kit to compete with BDS. We'd run one on our Company 2020 Bison build :like:

I got the 2.1's in the 2-4" lift size as I ordered before the 3.3's released for the JT. Plus I kind of wanted to wait to drop more $$ and get their aDapt series when it comes out later this year. Or I might go with some King's at some point if I don't care for the falcons. Right now on initial...

Nearly finished my Pro-x No limits kit install today. Only hang up that delayed us (wife loves helping work on the trucks too :)) a bit was on the rear. My Pro-X cradle had hole alignment issues, had to die grind open 2 of the holes, front to back spacing was about 1/8" too narrow. Overall the...

final boxes of my kit are coming at the end of the week, planning my install for next weekend. Can't wait to join the 3" Pro-X club. Planning to document the install and make a youtube video of the job. Will be pairing it with Falcon shocks

@Rock Krawler Suspension Any updates on the hardware shortage situation? Curious when I may expect to see my rear Pro-X box ship as it is the only part of my lift that I haven't received. Or perhaps all the Pro-X's are now delayed a bit due to the pattern tolerance issue? Thanks!

I unboxed the parts I've received so far and have found a mix of silver and black set screws from box to box, the rear JT specific parts seem to be silver and the front JL/JT parts seem to be black set screws. I was just looking like crazy yesterday for the 000 grease and came across your...

When I ordered from North Ridge on BF my kit showed a few things in stock (which I received within a week) and many other components listed as being a 10-15 day lead time so about 2 weeks. If it takes 3 during one of the busiest shopping times of the year, meh I understand. Maybe you just missed...

Yeah I still have an 08 Tacoma with Ray10's on it as well. Love them. The new BR6 Toyota wheel is looking pretty nice as well, almost like a 6 spoke version of the K5's

Thanks. Very happy with how they turned out on the truck. I was all over the place deciding on wheels but fell back to these Stealth Custom Series K5's after telling myself I didn't actually need the big heavy/badass 50lb beadlocks on my DD, these are only 25lbs each, I measured a stock take-off...

Just got my new 37' Yokohama's and SCS K5 wheels mounted up today, stock/no lift. Waiting on the remainder of my Rock Krawler lift to show up, hopefully before christmas so I can install during my time off.

I ordered a 3 inch Pro-X No limits kit on Black Friday from North Ridge and have begun getting it in pieces(front upper, front track bar, and rear lowers so far). Opted to order some Falcon 2.1 series 2-3.5" lift shocks with the kit for now(I'm planning to go with their new 3.3 aDapt when they...

I'll be at SEMA this week, maybe I'll be able to get some more info from someone there. Will update if so. :like:

Anyone hear of further updates? Would love to add a clean factory controller to my new JTR. Anyone have experience with the Curt Spectrum controller? Looks like a relatively clean alternative to install but not cheap, especially when I have a Tekonsha P3 I can pull from another one of my...

officially part of the club. Ordered it Sept 11th, arrived monday, dealer prepped yesterday and went and signed tonight after work. Excited to get started on the first mods and get it off road. Wife wanted a picture with it before leaving the dealer