I have a Sunrider for hardtop and it was not fitting correctly on my 2021 Jeep Gladiator Rubicon. I contacted Bestop but was told it was fine and that they had done extensive testing and there was no issue with how it was fitting in the pictures below. I highly disagree with their statement...
Anyone out there installed one of these PWM fan controllers? I'm looking to be able to adjust when the cooling fan comes on / hits 100% power and be able to manually turn it to 100% to help speed up cool down before shutting the engine down. I've used the RPM extreme one in my 07 JK when I...
Anyone tried one of these yet to replace their battery?
https://www.ablithium.ca/product/13-2v-100ah-1000cca-starter-deep-cycle-marine-ip67-mercury-spec-lifepo4-bluetooth-heated-battery-copy/
Looking to find someone who has used the Synergy 5" or 6" springs on the front of the Rubicon Diesel. They only rate them at 4" (table from their webpage below) for the tallest they have when used on the Rubicon Diesel. I am trying to go taller then my Evo 4.5" springs that were installed in...
I take my Gladiator to some very dusty areas and was hoping to install the AEV snorkel with the prefilter to reduce the clogging up of the air filter, ie the cylone prefilter should reject most of the dust. Currently I keep swapping in and old air filter (in the factory box) when I get to the...
Wondering who out there has an EOC stage 1 - EGR off -DEF on 20 HP tune? I'm seeing some possibly unusual behavior since I put it in and am wondering what others have experienced.
Tune has been in for 700kms or so.
-I've seen the DPF go to zero, prior to the tune it has never gone below 9% on...
20,000 kms on my Teraflex tie rod on my JT. Had a clunk when you swung the vehicle hard one way and then back the other like something in the suspension was shifting. Honestly felt like it was under my feet. During my troubleshooting I found that the ball joints on the Teraflex tie rod ends...
Wondering if anyone else out there has had the same issue as I am with their Gen 3 steps. Mine were working fine for the last year, with the exception of having to reset one step once or twice by disconnecting the plug to it so it would recalibrate. About a month ago I was taking my JT in for...
Wondering if anyone has tried this
https://fabtechmotorsports.com/product/coil-correction-kit-fts24280/
They have a template included to redrill the holes for the upper front coil spring isolator. It spins the upper isolator to correct the spring alignment to get rid of the coil bow.
Wondering if anyone has had their diesel Gladiator oil filter housing/cooler replaced under warranty. The dealer already replaced the gasket for the oil filter housing but that didn't solve my oil leak. After they replaced the housing gasket the air conditioning condenser started leaking so...
Wondering if anyone out there is using the Steersmarts ( 79040001 ) frame side steering box brace and a drag link flip as the Steersmarts lowers the bottom nut on the steering box more then the synergy brace. Probably should have gone with the Synergy brace for that little bit of extra...
Going to be travelling from Vancouver, Canada to Los Angeles in a couple weeks. I am wondering how picky the police are in Oregon and California about tire poke, mud flaps, and bumpers? I have a 4.5" lift on my diesel gladiator with 37's that poke out a couple inches from the factory fenders...