Search results

Yea I run my Baja Boss MTs at 28psi cold. Have over 25k miles and have very minimal even wear it’s crazy.

Yes I have these. Wont really fit with the stock track bar. With the old version of the straight Metalcloak track bar the tire barely rubbed on it at 25psi. Metalcloak track bar is solid so the diameter is smaller. Ran it like that for a while but the finish on the track bar was starting to get...

Yes. I have / had both and works just fine. Order the softopper with the trail rail clamps.

This is badass guys and it would simplify some of the wiring / rewiring I am doing right now with the Voswitch...love the backlight panel and ability to switch function / trigger wires.

Yea we shall see! I will try to be optimistic but keeping expectations in check. I just expected the right axle assembly to be replaced as per the Customer Satisfaction bulletin. That would have been an hour of work and sounds like I won't get it back till Friday now. Worst case it doesn't work...

Going through this now with my 21 Gladiator. To my shock, the dealer is not replacing the entire axle assembly, but are going to try and rebuild the bearing, ring, and seal. I expect this to not end well and has been a big enough issue now that the Jeep is out of the 3/36 warranty. Apparently...

This was one of the main reasons I switched to the Bestop...Softopper looks much better with the hard top on the truck in my opinion because it lines up perfectly and materials don't clash. Whereas the twill Bestop matches the twill soft top material and height perfectly. I originally had a...

I traded in my 2018 Mojito JLUR for my Gladiator. Loved the color and it was generally well received from others. I might prefer the Sarge green that I have just a little bit more on the Gladiator.

I have a decked system as well and looking at tonneaus. This is not compatible?

just realized one of these is with the hard top. I’ll try to find other pics. Here you go:

Yea the max has the 6000k led so you can swap between amber and yellow. The yellow lens on the max are darker to compensate. I have a set of pros as well in amber that have the 4000k led. So to your point if you swap to white from amber on the pros then the color would have a slightly yellow...

I am looking to do the same with my amber max fogs except change to the white spot lenses for highway use. I have two sets of SS3s and changing the lenses out is really easy.

I had 6" KCs and swapped them for 9" Baja Designs LP9. Totally worth the money on performance alone but look amazing as well. These are some of the biggest on the market but not perfectly round...They look perfect in my opinion on the Jeep. I don't have a winch though. Cheers

Crappy pic but I just towed my 2500 lbs loaded 5x10 enclosed trailer 6000 miles cross country from Seattle to North Carolina and back. I generally only get 11.2 mpg to 13.7 mpg around town where I live due to 1000 elevation changes and hills just about every time I leave the house (12.3 mpg...

Just be aware there is a ton of wasted space and the drawers have an odd shape. There is a reason there are a lot of them for sale second hand. This was the main reason I did not pull the trigger when I got my Jeep 3 years ago.

I have a cover on mine but it’s supposed to be weather tight. It will still get humid inside depending on the weather conditions. Drawer height is the main limiting factor at just under 8 inches so measure your bags and go from there. I just did a 6000 mile road trip and had it loaded down with...

I love the old International Scouts and I'm really digging this...Top doesn't technically come off but they have the sliding soft top like the option on the Wrangler and the rear window rolls down too. This really ticks almost all of my boxes as to what I would want as well in an EV truck...gas...

I pulled the trigger on the Bestop Supertop! I think it looks great and works better with my Decked system. Certainly some pros and cons between Softopper and Bestop though. The zippers are certainly a pain in the ass with new fabric and opening any of the sides and folding it down are much...

100% this. I had a manual JLUR and was going to go 5.38 gears on it with just 35s. Horrible factory gearing ratios in the manual combined with low torque motor was not fun. I am a huge manual fan but didn’t like it stock at all. I traded it in for the Gladiator right before committing to the...

I have the Reaper skidplate that I never installed that I am trying to sell. It didn't work with my old Ace Engineering bumper. Does look solid though.