Search results

Jeep Gladiator ACS Forged Bed Rack and Accessories: Rack sells new for $1850 Includes QTY 1 - GEARPOD XL with keys, sells new for $599 Includes iKamper specific RTT mounting brackets, sell new for $119.00 Includes MAXTRAX GearPOD XL mounting Brackets, sells new for $95.00 Includes QTY 2...

No you can just pop the liner out. Very quickly.

Yes, I went with non-trimmed, texture black version.

I just did my own paint job on the Motobilt Hammer with bull bar, fog mounts and skids. I was planning on doing a write-up if there is interest. Overall an easy job and I went a few rungs up from rattle can. I used a mid-grade Harbor Freight HVLP spray gun and automotive store primer, top...

I will snap some pictures tonight of the bumper, its off of the jeep currently though. When I initially damaged the frame by contacting the ARB tow-hook into a rock I thought I would be able to re-use the ARB but it pushed back with the frame considering its attached to the tow hook so after...

Sorry for the big delay in response; have been very busy with work and traveling all over the place. I liked the ARB Bondi Full width, tucked the winch down low re-used the fog lights... my only complaint was how it looked with the fender chop but not sure if that is a factor for you or not. I...

I went back and did this. My rainy weekend originally left me in a quicker mode than I wanted to be.

Wearing in very well - that is to say I have not had any issues. I re-torqued everything as the instructions indicate and have been out and back to Moab with it as noted so lots of miles. Have also done numerous Colorado adventures. Still love it wouldn't change a thing except maybe 37s.... I...

Removed when new bumper was installed. Front only Located in Conifer Colorado - 65$ for both

Replaced factory DRLs with QUAKE fender chop DRL kit. Passenger side DRL and marker with harness in excellent shape, drivers side has some damage but still lights. Both for 175$ Located in Conifer Colorado

Removed to install an ARB bumper that included a new skid. 50$ Located in Conifer Colorado

Removed at 20k miles to install a lift kit – lift kit reused the front Lower Control Arms so those are NOT included – what you see in the picture is what you get. 300$ Located in Conifer Colorado

Set of four granite crystal Jeep Rubicon wheels 17 x 7.5, 5x5 bolt pattern. Fits JT Gladiator, JL and JK Wranglers. Taken off at 20k miles to upgrade to 35 inch tires. Tires are factory Rubicon: FALKEN Wildpeak 33 -Inch LT285/70R17C AT3s. Four are mounted to the rims with TPMS sensors included...

Just a thought/question. Does your Gladiator have anything on the roof? rack, tent or other? The antenna for the XM system is located on top of the roll bar - see this thread from @drewkillsit

Sorry for the delay - just updated the second post, ill get the pre/post measurements I took up next.

Thank you - totally understand your point I went with lots of articulation after then re-torque to check and everything was in spec.

I am working on the measurements pictures and will hopefully upload tomorrow. I was afraid it would be too much for 35s too. As with most things you have to honest about your goal.. for the extra space at static ride height isn't goofy looking because I know I need it for actual articulation -...

Where in Colorado? Message me... We can meet up and you can see the AEV if you want. I work by centennial airport and live north west of there by alot.... I also just posted my AEV writeup in this section.

Note: these were not taken in exactly the same spot of my driveway - nor is my driveway the most level; just some pre and post checks for a good understanding of the additional height provided: Sorry for the delay - I put together some pictures of the suspension travel after the lift - I...

Getting ready for another trip to Moab this year and after adding the new tires and wheels (Method 387 ROOST and 35X12.5 BFG AT KO2s) it was time to get some more clearance – minor articulation rubbed the fender liners and the ARB bumper. I was originally planning on the Mopar 2 inch lift kit to...