Search results

I have a MetalCloak rear steel bumper. It's great, but after installing, I have had issues with false-positives on the parking sensors (they go off when nothing is behind the vehicle). I suspect that the sensor "field of vision" is not symmetric 360° around. Is there a particular orientation...

How have you liked this so far? Have you noticed a change in power/sound/acceleration? And has the snorkel extension added any wind noise? Is the snorkel extension fairly easy to swap in and out?

Thanks for posting this. Is there a part number for the “female” complement to this connector, coming from the lights? Looking at this for LED license plate lights in order to plug them into factory harness as opposed to splicing to harness.

I found the wiring a bit flimsy, and mainly was looking for an alternative that utilized the exiting harness connector as opposed to dealing with splicing directly to the factory harness. Found this not long after posting my question —...

Hey, looking for suggestions on license plate light units. I switched to Metalcloak's rear steel bumper, and I did not have success getting their included light to work. Ideally looking for a unit that does not require splicing and plugs in directly to the factor wiring harness. Suggestions/tips...

Hey thanks sounds interesting, is there a link or product number for that?

Yeah worried about snow and salt especially. Was thinking maybe working with a thin metal sheet (aluminum?)and cutting it to create the proper shape. Something manufactured would be ideal though.

In regards to the Mopar front steel bumper — I recently installed one to replace the plastic bumper on our 2020 Overland (along with Mopar skid and winch guard — winch will be next year). Looks great and seems very solid. It’s pricey but you get LED fog lights (for me this was an upgrade)...

Rokblokz team recently got back to me and updated their install instructions to accommodate the Overland trim. Basically entails putting the mount clips on the vehicle mount tabs directly (as opposed to the flap). It’s only day 1 with this setup, but seems to work well! Haven’t had time yet to...

Any idea where the sides are located on the seats? Wondering for the sake of knowing where to cut holes for seat covers.

I have. The sidesteps sort of get in the way but you can still get the flaps on. I cannot seem to get the thumb screws to go in completely flush against the inner fender wall, the 3 flap holes do not seem to align perfectly with the 3 vehicle holes and so you end up having to put the thumb...

Can’t speak to the Mojave, ours is an Overland.

I sort of did -- the outer corner of the flap had to be bent forward to the inside of the wheel well to get the flap "up" far enough for the flap holes to align with the mount holes. That's fair enough. However, still seeing an issue where the thumb screws are not flush with the vehicle wheel...

Looks great. Was curious about your experience with the Dv8 rear bumper (DV8 part number RBGL-01). Was the install on this fairly seamless? Did this work well with factory parking sensors? Thank you again for sharing.

Has anyone had success installing the front RokBlokz flaps on the Overland trim? The groove that goes over the fender is 1-2cm too shallow, and I cannot seem to get the flap high enough to get the outer hole screwed in. I am considering mounting the metal clips that are meant to go on the flap...

Does anyone know if the factory skids cover the transfer case like this product advertises? -- https://www.quadratec.com/p/quadratec/aluminum-modular-transfer-case-skid-plate-wrangler-jl-unlimited-gladiator-jt Just trying to understand if there are any major gaps in underbody protection with the...

Does the front way bar skid plate supplement, or replace a front bumper skid plate?

Also have noticed rust after having the Gladiator for about 3 weeks. Just noticed these rust spots after doing some light off-roading for the first time. Looking to get the underbody treated soon, but just wondering, are these rust spots on the frame an indication of something serious, or will...

Thank you so much for taking the time to outline this! I seem to have a third plastic fin in the middle of the 2 fins you've shown, offset up and a bit behind away from the tire (maybe the Overland fender is different). Will try to work through it, thanks again!

Hey thanks for posting. I tried to install the front RokBlok mudflaps on our JT Overland, but found that the 2 higher holes on the flap didn't quite align with the mount holes. Did you put the flap completely behind the 2 mount holes (the 2 holes sorta on the fender)? It seems like no matter how...