Search results

Digging through my emails, I'm a lil fuzzy on the details, this was a while ago. Looks like I ended up running the Rough Country 1017 links in the rear, they're for a JK with 6" of lift but they measured 12.2" eye to eye and that put my rear sway bar where I wanted it. I think you're looking...

I ended up using JK Sway links for my build. I was looking for a specific length and came across the JK links, they were inexpensive, and the dimensions / fastener bores matched up with the JT.

Not so much "Today" as in "Over the last week" but Im pretty stoked on this. I've been doing pre-summer maintenance and repainting my bumpers and stuff with bedliner, and I'm overhauling the Black Horse Classic roll bar. I bought two 5ft pieces of black unistrut and a mix of stainless and...

I've had a large block of foam material set aside in the garage for the last few months and finally got around to this. I used a piece of cardboard to mock up the general shape, traced that onto the foam, and then used my lil M12 handheld mini reciprocating saw with a fine tooth blade and carved...

Hold up pause the argument while I make some popcorn. Aside from that - I have my door windows tinted and I have to roll them down sometimes at night. I cant imagine having my windshield done - then again, yall prolly have better eyes than me. Has anyone done like a clear, antiglare tint on...

Im with OP on this one. If its so easy to do, we should be expecting the manufacturer to do it, especially at the prices theyre charging. Its not about how easy it is to fix it, its about the principle. So many of my purchases have needed additional work to fit properly, had to replace trash...

$400 upcharge to powder coat 🤣 These people are psycho.

I understand - I just hoped you had a link to an inline harness, similar to the 12v Y adapters people frequently use to feed off the cig lighter harness. I can cobble together a hub and some mini usb adapters and whatnot to create this for the mini usb ports behind the media hub part, but I...

Would you mind sharing the USB splitter you used? Id like to do something similar for the footwells. Thanks.

My cowl pod lights and the light bar on my front bumper are all $20 china garbage. Theyve been running for years and served me well in plenty of hunting trips and times I found myself wheeling in the dark. The trick is to open them up and apply RTV then reassemble. Most of these lights have...

Looks amazing! Im going through mine and doing a bunch of cleaning and touching up and stuff, the first time Ive really done a pre-season clean and prep like this. Your pictures are really motivational! How did you get all the bits under the hood so clean? Did you just spend a bunch of time...

The American Adventure Labs ones are the closest I have found to the solution Im looking for. The Road Armor ones look neat at first, and theyre less expensive, then you realize they slap on over the existing plastic ones. I really want a full metal replacement for the OEM ones, that have...

I hate to say it but Im with you on this one. I installed the Black Sheep kit uhhh.. I dunno, a year or so ago? When they were pretty new. Its really cool and I love it, but I overpaid massively for the product and I mean.. right away I had to McMaster a replacement latch because it didnt come...

Id like to look into these a bit, but they arent listed on the JCR website under JL or JT, do you have a link?

Looks great! Can you share with us a lil about your removal technique? I'll probably be doing this soon as well, had generically planned on using a heat gun, razor blades, and rubbing alcohol.

If you get the PSS-23WRA Kit from Alpine it comes with an underseat bracket and harnesses etc https://www.amazon.com/Alpine-Electronics-PSS-23WRA-Wrangler-Upgraded/dp/B07K43KGPF Ive got one of these mounted under the passenger seat, and then I used RCA Y-Splitter cables to run signal to a...

Ive had good results using Polycam on my smart phone to do 3D scans of motorcycle frame / parts / etc and importing the mesh to Fusion 360. Scale feature through Polycam is hit or miss so I scale the mesh in Fusion. I've made a few custom bike parts by going this route and will prolly be...

Currently have the JCR Offroad Molle Panels on the driver and passenger side, with a fire extinguisher mounted on the drivers side, like the picture on their site: https://www.jcroffroad.com/product/JTIMP-PC.html Ill be relocating the fire extinguisher soon, and debating on whether I want to...

Neither - Tazer is trash. Get a superchips Flashcal.

Okay okay I got one - $455 for a key fob cover...