Search results

Funny but I was thinking of going with a synergy tie rod in the future so I looked into the 1.5' clamp version of the ATS and that one in particular is still regular price. Just FYI

So assuming this is the corresponding clamp, would this JK Fox ATS be the one to purchase for a Rubicon JT? https://www.northridge4x4.com/part/stabilizers/983-02-146-fox-2-0-ats-steering-stabilizer I noticed I banged up my OEM stabilizer and I have the matching Fox shocks so I've been wanting...

I haven't gone through the full thread here yet but just chiming in with regards to your doubt about dealerships being able to perform the repair with a replacement CP4 pump. My JT with 32k miles went out while on the highway, not fun. It spent 3 weeks with the dealer but it was indeed...

Yep wired in a relay to take the place of the switch.

Okay so I tried this out and I'll attach some photos. Feel free to let me know if I should make some changes. What I did was connect direct to Aux 2 under the hood and kept the fuse in line. Inside, where the lines come in under the seat, instead of just placing the RSE rocker switch I had an...

1&2 are the 40, 3&4 are 15. I'm currently placing on the #2 switch.

Thanks for the input. I'm all for trying it out but just have some questions. So replace the fuse for aux 2 in the PDC with a 20 amp? Second, if you don't mind can you just give me a quick how-to on wiring the loop at F correctly, and I'll get it going.

That's how I feel, especially knowing that others have done it. I can easily use the RSE switch but now I'm on a mission to find out.

Thanks, I'll try that. Haven't done it previously since yellow is just for the switch light.

here is photo of the switch and a screenshot from an install video showing the proper wiring called for.

This, right? I was thinking about needing to act as an interrupter as well.

Darn. I've read posts of people wiring them up how I intended but didn't thought it would be a lot more plug and play. This might be getting above my pay grade. Regarding the ground, I've even tried running directly to battery ground terminal. "I" and H are actually directly at battery and...

Just to add, I feel like it's a ground issue. I've checked all fuses too. And the aux switch lights up and I've already checked to make sure it's seated correctly.

I appreciate it. Can't upload the whole install pdf because the file is too large but here is a link, it's pages 4-6 more or less. https://tinyurl.com/26p4hj4r I'll attach some screenshots but they'll probably be horrible.

They're triggered by magnets and sensors on the door/frame. Weird thing is that a plain old rocker switch makes them function just fine. 2 seconds later connected to aux, nothing. Weird but I might just throw in the towel on this one and use their switch. There's a separate fused line that...

So I did that just this morning and I'm getting around 12.14 v I believe. In a nutshell here is my issue. I am connecting the RSE sliders and when using their rocker switch, works and triggers as intended. Using the same power and ground cables from their switch to Aux 2 and in cab ground post...

What became os this? Seems like I might be chasing a similar issue. Thanks.

Reviving an old thread here. I'm having a heck of a time trying to wire to Aux 1/2 and just wondering what I am doing incorrectly. I feel it's a grounding issue. If I power and ground to the RSE supplied switch the steps trigger fine. However, if I connect power to Aux 1 or 2 and ground to any...

Started on the rear end install today and everything going well....until the I noticed that only 1 sway bar link relocation bracket was installed and not the 2 shown in your image. Really stinks, hope I can get a hold of them on Monday and get some pretty fast shipping.

Switch pros maybe?