Search results

I know i can't get away from connectors. I just don't like the design on it. If it was done better it would not have been able to bend a pin. I think it needs a better way to line them up before they can make contract and get bent.

Well I found the problem. 2 pins in the fuse box got bent. I really don't like the design of the fuse box but I shouldn't have to ever move it again.

So I have seen a few post that way. You don't need to pull the fuse.

So I don't think its a alarm. When I pull the relay it stops. When I reinstall the relay I can fell the relay charge. I swapped relays still the same

So I pulled the aux. I hooked the positive to the main and taped the negative. Also pulled the fuse. It fired up then shut off. I hear a computer squeal under hood which stops when I pull the add relay. It also is telling me I have a power steering issue

Robert massey In 2025 I Resolve To Offroad with Metalcloak! To fulfill my pledge I need: #1 UnderCloak Integrated Armor System, JT Gladiator, 3.6L Motor https://metalcloak.com/jt-gladiator-undercloak-armor-skid-plate-system-3-6l-motor.html #2 Carbon JL/JT Rubicon Front D44 32 Spline One...

Metalcloak 2024 "I Pledge to Offroad" Giveaway Aluminum Overland Tube Fenders, JL Wrangler/JT Gladiator, Front, Pair Jeep JL Wrangler, JT Gladiator, Baller Joints™, HD Ball Joints, Full Set Aluminum Overland Tube Fenders, JT Gladiator, Rear, Pair This I am going to have to get. Even with the...

We didn't get much here

They said they have seen alot of crazy stuff but this was a new one. The mechanic called over the others to show them it

No. Both nuts were on it. The one to hold the wire was on but the order of installation was wrong.

Well I was having problems with the ess since it was still under warranty I took it to the dealer. Well I was surprised at the issue to say the least. So here is on more thing to check when you have the issue. When mine was built they put the nut on the starter before the wire so it would not...

Took the kids to a pond and ran trough some mud. Then I wash it. Also finished painting the engine skid. Next weekend I will install it

I will do lite wheeling in it. Rest of the wheeling is done in the xj which I don't owe a dime on.