Alright- so, this seems to be a pretty broad brand deal with a lot of smaller companies making good products.
Currently have a canopy with a decked system and would like to get a slide for our snowmaster fridge.
If any of you are also running a fridge on a slider- either straight slide, tilt...
Anyone with the diesel Mopar lift kit add a spacer up front? 1ā or 1.5ā??
Looking to ālevelā the truck, but not do this twice to get things right. :)
Great opportunity for anyone who wants to post photos of their Jeep šš¼šŗš¤Ŗ
As the title states. Have you experienced any electrical issues after installing a tazer?
might be helpful if you have had issues to post specific vehicle info.
2022&2023 DIESEL rubicons- both the same issues when left installed.
For context I hit 18 months, picked up tires, purchased the...
I am late to the show in realizing the 392 wranglers come with CV front shafts. Anyone have a part number?
Do the awd/selectrack (whatever itās called- the Non 4high 4lowā¦.) jeeps come with these axle shafts as well?
Curious to see a side by side comparison of these shafts by Mojave/rubicon...
If someone better with the search button finds this thread already covered- please post and Iāll delete.
Looking to add JScan to the arsenalā¦ (yes I am behind). Both of these are listed as recommended on the JScan webpage. However, I want to ensure I am not missing any big differences...
Hello to all.
In the market for a front track bar. Rear I went with Clayton for tire clearance.
Front- looked at synergy and read about clearance issues on the axle mount.
Steer smarts I am reading clearance issues with aftermarket covers (running a nodular iron Dana coverā¦)
Next looking at...
What is everyone using as the measurement point for rake?
Rubicons have 2ā taller fenders- so, measuring ground to fender line? And subtract 2ā for rubicon/mojave front fenders?
or are folks measuring ground to frame rail?
This topic came up over the weekend and my JTRD measured exactly the...
I have recently learned that the jounce tubes on diesel, 392, and XR are 1-3/8" longer than v6 and 2.0t models (JL&JT)
This definitely explains the crazy short up travelā¦. I am curious though, has anyone pulled the springs before a lift and articulated to verify how much bump is actually...
Ordering tires. There are a lot of variables with 40ās. Rubicon fenders, non rubicon fenders, fender liners/no liners, axle widths, suspension lift size, bump stop height, wheel specs (widths, diameters, backspacingā¦.)
In an attempt for others to come together- and for folks to drop photos šā¦...
Alright, bring on the gasser guys with the hateā¦.
Anyone else develop an oil leak on their diesel yet? Appears to be coming from the passenger side āfrontā of the motor. I havenāt taken the belt cover off yetā¦. But so far guessing itās somewhere up there.
Just looking to get a general idea...
If anyone is board and wouldnāt mind taking a couple measurements for me.
Need ground to Bottom of frame rail front and back (I measured as close to control arm brackets as possible)
And center of the tire ground to bottom of fender flare.
my frame rails measure:
13ā front
12.75 rear
Front...
Searching around on the pennzoil site and saw this: 6 gallon eco container.
The buy online button isnāt working for me- might be the time, my phoneā¦. Whatever.
Anyone seen this or know where to get it at...
Ok- a lot of folks here trust their dealersā¦. I donāt. š¤·š½āāļø
Made it to the parts department a couple min before closing and like an idiot I red the stand out 10 year 150k and didnāt pay attention to the part numbersā¦.
Which is the ācorrectā spec for the 3.0 ecodiesel.
Second- anyone savvy...
Iām sure many are asking why??? Just buy another bottleā¦. We own 5 diesels.
$17 for a 16oz bottle $1.06/oz
$79 for a gallon $0.61/oz
Spread across all 5 vehicles it adds upā¦
Also- yes, 24 Days?? and we wonāt be able to driveā¦. š¤·š½āāļøš¤Æ
would like this to be a dedicated Method wheel photo bomb thread!
drop a photo, list the name, what size tire and lift. If the wheel is offered in different back spacing or you have added spacers list that as well.
looking to order some beadlocks and need inspiration (all methods not just...
(Subject)ā¦. If you knowā¦. Then you knowā¦. š¤£šš¤£
on a serious note! Picked up plastic rivets and a cheap tool at harbor freight to get a job done temporarily.
No joke- 75% of the rivets broke while installing, tool was equally as frustrating for such a simple toolā¦
Looking for some...
Hello to all,
My in-law needed a spacer lift/leveling kit installed and I figured I would snap a couple photos and do a mini write up.
tools needed (minimum)
1 jack stand high enough to reach frame
1 floor jack
15mm socket/wrench
18mm socket AND wrench
-lug key/tire iron for tire removal
Jack...
Hello to all,
I am very envious of the Alu cab canopy clamping systemā¦. However, I am not seeing a way to practically duplicate their design on a fiberglass canopyā¦. (Maybe itās just meā¦)
anyways! I have a century (rebranded leer) canopy. Itās almost come off entirely after the dealer...