lift

For Sale is a steel Bumper from EVO Mfg. had it on for about 6 months and never mounted a winch on it. Bought it bare and powder coated it white to match. Steel spacers and hardware included. It clears the sway bar disconnect on Rubicon models if you flipped the disconnect upwards. Rather sell...

Hey, thanks for approving my membership! I have a question about upgrading my tires. I recently bought a 2020 Gladiator Altitude that came with a 2” lift, but it’s still running the factory 18” rims with 255/70R18 tires. I’m looking to go slightly bigger to better fill out the wheel wells. Has...

Selling these LCAs with only about 500 miles on them. After my lift, I Just realized I needed another inch for what I do which required adjustable longer ones. These should work great as replacements for your current ones or if your building out your own 2" lift.

Hello everyone! My son and I will be installing the Clayton 3.5 Overland plus lift on my 2023 Gladiator Rubicon in a couple of weeks. I know there is a plethora of knowledge here, so I figured that I would ask if anyone has any advice or tips, or tricks they might pass on before I attempt. I put...

M

TopLift PROS Gladiator Pro Compatible with Jeep Gladiator Hardtop Removal System for Storage and Removal This is 7 months old, only used 3-4x's last summer. Always kept in garage. Excellent like new condition. Works great, I've decided to go with a cap shell and won't be taking off the hard...

I’ve searched and not found any good answers, please point me to anything I have missed. My 2020 Gladiator Sport S is starting to get some shaking in the steering wheel. I may be looking too deep into it, but either way have been wanting to lift it for a bit. I was wondering if the community...

In the process of installing a Clayton Overland+ 3.5" lift on my 2021 JTOD. I'm getting ready to drop the rear axle and trying to figure out what this hose is and if it's ok to disconnect it? It attaches to the axle and then runs up to a plastic clip where it attaches to the underside of the...

Has anyone seen this before? 2023 Rubicon JT on a 2 inch Mopar lift with bilstein shocks and adjustable track bar so my axle is centered, yet the passenger side is noticeably lower than the driver side. I measured tire to fender gap and it’s a 1/2 inch difference. When you look at the Jeep...

Hello everyone! I just got this jeep gladiator overland and I want to do a couple things to it! So to start of I want to lift it not an excessive lift but for it to look nice. And of course a set of wheels I’m not sure what offset, width to get since I’m not to this platform I come from the...

So I've got a 2020 Jeep Gladiator Sport S (NOT Max Tow). I've done a number of things to it including: 2.5" Clayton Lift w/ Track Bars & Adjustable Arms (Link) Falcon Shocks SP2 3.3 Fast Adjust Piggyback Front and Rear Shocks Falcon 2.2 Steering Stabalizer (Link) ABOUT TO REGEAR TO 4.88 (Not...

Who is the lift kit Encyclopedia Britannica? I need help making sure I’m getting the most, and right, 💥 for my 💰. I’ve got a ‘21 JT Rubicon with 60k miles and just got a killer deal on some 37” KO2s. My mind is telling me it’s my daily so level it and be happy. But my body, my body is telling...

New guy here. I currently have a 2016 Wrangler with a dealer installed suspension lift and 37" MT tires which works very well. I'm about to add a 2024 Gladiator Rubicon X to my fleet. Requirements for the new ride: Upgraded ground clearance. I have to ford a river to get to my house...

Hey Everyone, Im wanting to lift the truck myself and install the 2.5 AEV Suspension lift with the geo brackets. I will be throwing 37s on there with the Borah 17in wheels paired with 37x12.5x17 KO2's. I have rubicon fenders installed so I think I should be good for fender clearance. I know the...

So I have a 21 Sport S that came with the Mopar lift and 35s. I am in need of new tires and found a good deal on a set of 37s which I am going to anyways. My question is will they fit under the Sport Fenders? I'm sure I need bump stop extensions to do so because at full flex the 35s are almost...

Does anyone know what size tires might be on this gladiator? Or if there is any lift applied

2023 JT Rubicon Diesel Getting ready to order the list below. I will be 99% on road so I’m not looking for the most extreme bulletproof parts and flex. I want a quality lift that’s good on road and won’t rub if I decide to do some off roading. Any input on this list below? -Clayton 2.5”...

So I just got a quote for my Jeep Gladiator Sport lifts and I wanted some feedback/opinions. I’m between going with BDS lift kit 2” inch with Fox shocks or JKS 3.50” inch lift with fox shocks, and control arms. So I wanted to know I have a sport so I don’t have the rubicon gear ratio and I don’t...

I’m in the market for a lift kit and came across rough country’s 3.5” with no shocks because I’d like to keep the fox shocks that came with it. Now they say it only fits the Mojave models. Is there a reason why it doesn’t fit the sport models? If anyone knows any other brand lift that doesn’t...

I’m selling my AEV Dual Sport springs. These are the 2.5 versions for the EcoDiesel. Designed for over landing rigs, the actual lift is closer to other companies 3-3.5 lift. I’ve replaced mine with the 3” high capacity springs. These are in good condition with a little surface rust. They should...