cjatkinson
Member
- First Name
- Chris
- Joined
- Jun 6, 2020
- Threads
- 4
- Messages
- 21
- Reaction score
- 14
- Location
- San Antonio
- Vehicle(s)
- Jeep Gladiator
- Occupation
- Radiology
- Thread starter
- #1
Hey everyone, I was reading some conflicting information on several different threads, and I wanted to give you my experience. I have a gladiator overland with halogen fender flares. I was able to remove the halogen fender flares and install the Rubicon LED fender flares without any difficulty. The wiring harness is plug and play. Unfortunately the led lights do not properly work when the turn signals are turned on. Everything cuts out.
I tried installing resistors, but I couldn’t get that to work either. I eventually bought a cheap obd called icar pro off amazon and used JScan to flash the ECU and now everything works well. See details on the JScan app site: http://jscan.net/supported-and-not-supported-obd-adapters/
I tried installing resistors, but I couldn’t get that to work either. I eventually bought a cheap obd called icar pro off amazon and used JScan to flash the ECU and now everything works well. See details on the JScan app site: http://jscan.net/supported-and-not-supported-obd-adapters/
Sponsored