DRL fender lights not working

[AbnMP13]

2025 Gladiator Rubicon X.

Bought a harness that plugs in behind front fender running lights and wirethese to come on with the DRL

https://a.co/d/aYNhKdp

about a month later when I start the jeep the running lights flash about three times and go off.

I have a mini Tazer and have the DRL loc set to dedicated but no luck.
Anyone have a guess?

Sponsored

 

[vicsvx]

The specs say 75w... Maybe you are overloading that circuit. Try disconnecting the added lights and aww if the resolves the issue

 

[AbnMP13]

The same setup is working fine on my wife’s 24 Willys Wrangler.
Just one difference, I ran both of her fog lights off the driver’s side and on mine I used two connectors.

 

[AbnMP13]

Put a relay in and all is well.

Took out the Auxbeam switch panel and put a Voswitch 8 button in. Had the Auxbeam on a ball mount on the driver’s side grab handle but the reflection on the drivers window bugged me.
Had a CMM mirror mount on the driver’s side too but the Voswitch and CMM mount don’t work together.

Sponsored