Sold: Iowa Gladiator Topper, LEER 100S

[StarsMojave]

LEER 100S Jeep Gladiator Fiberglass Topper

-Purchased new in March 2025.
-Just ordered GoFast camper for my Gladiator so want to sell topper.
-Side windows slide open with screens.
-Exterior has factory black paint that resembles the texture of the Gladiators hard top.
-Sanded and coated interior surface with marine grade fiberglass primer and gloss white paint.
-About 2000 miles on my Gladiator.
-No damage and has several coats of ceramic protection on exterior surface.
-Has factory LED interior light along with trailer plug TAG brand third brake light/internal light 7-WAY interface T harness for easy wiring.

Asking $1850

Sponsored

 

[RickD]

still posted is it still available?

 

[StarsMojave]

still posted is it still available?

Yes, it is still available.

 

[RickD]

can you explain the following statement in your post: " Has factory LED interior light along with trailer plug TAG brand third brake light/internal light 7-WAY interface T harness for easy wiring. " I have no idea what that is for. Also what is that wire hanging down in one of your pics? Where in Iowa are you. I live in Montana but will be in Sioux Falls for a golf outing in mid September.

 

[StarsMojave]

can you explain the following statement in your post: " Has factory LED interior light along with trailer plug TAG brand third brake light/internal light 7-WAY interface T harness for easy wiring. " I have no idea what that is for. Also what is that wire hanging down in one of your pics? Where in Iowa are you. I live in Montana but will be in Sioux Falls for a golf outing in mid September.

When I took the picture of the inside I had not tucked the wires to inside light back where they belong after I painted the inside. Those are not loose wires now. Inside the drivers side back end corner is a factory fuse/junction box that is designed to power the inside light and if equipped a third brake light. One way to wire from this box to the Gladiator is to use a junction connector that plugs into the back of the 7/4 pin trailer power plug. Just have to unplug the harness in the back of this plug and the junction connector in and splice three wires. I can do this for you. If you want phone 402-nine57-seven541.

 

[StarsMojave]

When I took the picture of the inside I had not tucked the wires to inside light back where they belong after I painted the inside. Those are not loose wires now. Inside the drivers side back end corner is a factory fuse/junction box that is designed to power the inside light and if equipped a third brake light. One way to wire from this box to the Gladiator is to use a junction connector that plugs into the back of the 7/4 pin trailer power plug. Just have to unplug the harness in the back of this plug and the junction connector in and splice three wires. I can do this for you. If you want phone 402-nine57-seven541.

can you explain the following statement in your post: " Has factory LED interior light along with trailer plug TAG brand third brake light/internal light 7-WAY interface T harness for easy wiring. " I have no idea what that is for. Also what is that wire hanging down in one of your pics? Where in Iowa are you. I live in Montana but will be in Sioux Falls for a golf outing in mid September.

I forgot to cover where I live. I’m in the southwest corner of Iowa and could meet you in Sioux Falls mid September if that would work.

Sponsored