Summit Series Rear Bumper For Jeep Gladiator - Rebel Off Road

[RebelOffRoad]

Rebel Off Road Summit Series Rear Bumper JT Gladiator w/Bedside Slider Steps

Rebel Off Road is proud to introduce our new Summit Series Rear Bumper for the Jeep Gladiator! Our Gladiator bumper is inspired by our JK and JL design to offer not only a great looking bumper but also a highly functional one.

Also included in this package is our Bedslide Slider Steps for added protection underneath from rocks as well as a step platform. This step provides stability when reaching up to open a roof top tent or grab accessories mounted to a bed rack. Both the bumper and step slider come with our suregrip tread plates to help with foot traction in multiple types of climate.

Bumper Features:

• Surefoot utility steps (on each corner)
• Works with factory tow hitch and tow plug.
• Park assist/back up sensor holes
• Sensor brackets included
• Sensor hole plugs (for Gladiators without back up sensors)
• Includes license plate lights
• Recessed light mounts. Cube style - Fits most popular 2x2 lights.
• Extra heavy-duty recovery shackle tabs (1” thick machined steel).
• Laser cut and press brake formed from 3/16" thick USA steel
• Suregrip tread plate included
• Hardware included
• Fully welded and sanded finish
• 100% Made in USA! With US steel.

Step Features:

• Frame mounted (unmatched protection for the rear of your truck bedside)
• Built in slider
• 100% Made in USA! With US steel.
• Incorporated step
• Suregrip tread plate included
• Hardware included
• Laser cut and press brake formed from 3/16" thick USA steel
• Works with factory exhaust
• Works with factory and aftermarket fenders
• Mounted to frame using existing factory holes.
• Fully welded and sanded finish

Our powder coated bumpers are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.

Available for Purchase: https://rebeloffroad.com/ROE-JT-RB-B01-RBS-C-BLK

Sponsored

 

[Jeepasaurus_Rex]

The clearance on that is siiiiick. Great job, ya'll!

 

[RebelOffRoad]

Rebel Off Road Summit Series Rear Bumper JT Gladiator

Rebel Off Road is proud to introduce our new Summit Series Rear Bumper for the Jeep Gladiator! Our Gladiator bumper is inspired by our JK and JL design to offer not only a great looking bumper but also a highly functional one.

Also available for purchase, our Bedslide Slider Steps for added protection underneath from rocks as well as a step platform. This step provides stability when reaching up to open a roof top tent or grab accessories mounted to a bed rack. Both the bumper and step slider come with our suregrip tread plates to help with foot traction in multiple types of climate. Check out our Slider Step HERE.

Features

• Surefoot utility steps (on each corner)
• Works with factory tow hitch and tow plug.
• Park assist/back up sensor holes
• Sensor brackets included
• Sensor hole plugs (for Gladiators without back up sensors)
• Includes license plate lights
• Recessed light mounts. Cube style - Fits most popular 2x2 lights.
• Extra heavy-duty recovery shackle tabs (1” thick machined steel).
• Laser cut and press brake formed from 3/16" thick USA steel
• Suregrip tread plate included
• Hardware included
• Fully welded and sanded finish
• 100% Made in USA! With US steel.

Our powder coated bumpers are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.

Available For Purchase: https://rebeloffroad.com/rebel-off-road-summit-series-rear-bumper-jt-gladiator/

 

[RebelOffRoad]

Rebel Off Road Summit Series Rear Bedside Slider Step For JT Gladiator

Available for purchase, our Bedslide Slider Steps for added protection underneath from rocks as well as a step platform. If you didn't purchase a Rubicon Gladiator but still want the bedside protection for rock crawling this step is for you. Our slider step provides stability when reaching up to open a roof top tent or grab accessories mounted to a bed rack. The step slider comes with our suregrip tread plates to help with foot traction in multiple types of climate.

• Frame mounted (unmatched protection for the rear of your truck bedside)
• Built in slider
• 100% Made in USA! With US steel.
• Incorporated step
• Suregrip tread plate included
• Hardware included
• Laser cut and press brake formed from 3/16" thick USA steel
• Works with factory exhaust
• Works with factory and aftermarket fenders
• Mounted to frame using existing factory holes.
• Fully welded and sanded finish

Our powder coated bumpers are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.

Available For Purchase: https://rebeloffroad.com/rebel-off-road-summit-series-rear-bedside-slider-step-for-jt-gladiator/

 

[RebelOffRoad]

The clearance on that is siiiiick. Great job, ya'll!

Thank you!!

 

[RebelOffRoad]

More photos of our final design of the bumper. This one is also paint matched with textured black grip pads on the top of the bumper and slider step.

 

[Jabakkarabbit]

I've been gawking at these pics and the ones on your link for half an hour. But that price is close to triple what most people spend for the front steel bumper. And this is top notch craftsmanship for sure.

BUUUUUTTTTTTT, we are awfully close to Black Friday. Are you gonna post a discount code, and if not, you can PM me.

 

[LancGladiatorGuy]

What is the antenna off the passenger side of the orange gladiator that’s attached to the bed rack?

 

[Jabakkarabbit]

Bought one today!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Will post pics and review after it is installed and broke in properly.

 

[Code 3]

Sorry if I missed this - what is the approx weight of this rear bumper?

 

[TexasTJ]

Why is it so hard to find a standard looking bumper (like so) that retains the factory license plate lights? Any chance we can see some pictures of the back side of the bumper? I'd like to see if it's possible to cut my own holes for the factory lights.

 

[Jabakkarabbit]

WEIGHT:140.00 LBS

Sponsored