Sponsored

THINSKINZ - FAQs

Status
Not open for further replies.

ThinSkinz

Active Member
First Name
Romina
Joined
Aug 23, 2021
Threads
10
Messages
44
Reaction score
92
Location
Santa Ana, California
Website
www.thinskinz.com
Vehicle(s)
Jeep Wrangler JL
Here are some of our most frequently asked questions - If you have any other questions you can reply to this thread or email us at [email protected]
  • Are ThinSkinz™ only for the rear doors?
    • Yes, ThinSkinz™ are made for the rear interior doors to protect your door panels from damage caused by things you carry in the back seat. Sold as a pair of Left and Right door protectors.

  • What are they made of?
    • ThinSkinz™ are made of ABS polymer which is the same hard plastic that many of your car's components are made from. As far as plastics go, ABS is used for its toughness and relative scratch resistance. Many hard-sided luggage models are also made from ABS for these properties.

  • How do they stay on without fasteners or adhesives?
    • ThinSkinz™ keep themselves on your doors by using their shape. There is a short flange on the top of each panel that hooks over the sill and a middle feature that slides into the door pull pocket on the armrest. They are also perfectly matched to the surface of your door like a second skin. All these elements work together to keep the panels securely on your door. No need for fasteners or adhesives

  • Is there something on the back of the panels?
    • Felt is applied in specific areas on the reverse side of ThinSkinz™ panels. This adds extra snugness and dampens any rattling as you drive.

  • Can ThinSkinz™ panels be removed from inside the car?
    • Yes, ThinSkinz™ panels can be removed from inside the car. Simply place your fingers underneath the armrest and push up. They should come right off.

  • Can you open the doors from inside with ThinSkinz™ installed?
    • ThinSkinz™ cover the door handles so passengers will not be able to use them while the panels are on. However, in case you have forgotten to remove them and you're not around to show them the recommended method of removal, there is a hole in the middle of the handle through which they can insert their finger. A slight upward motion will dislodge the skin which should be easily removed by continuing the motion. Make sure the child safety locks are not engaged on the door. This is done by using a manual screw-on Jeep Wrangler rear doors. We do recommend that you remove ThinSkinz™ panels before taking adult passengers in your backseat.

  • Will ThinSkinz™ fit different Jeep Wrangler JL trims?
    • Yes, ThinSkinz™ for Jeep Wrangler JL's will fit all JL trim levels with power windows. There is no hole cutout for manual window actuators. Please make sure that your vehicle is a JL. They will NOT fit JK's or earlier models.

  • How are ThinSkinz™ shipped?
    • Each order of ThinSkinz™ is shipped as a matched set pair of protective panels comprised of one left and one right panels. Each set will come in a box with instructions. approx dims 27" x 7" x 18"

  • What is your return/refund policy?
    • We'd be happy to handle your return and refund your purchase. Please ship the item back to us in new condition within 30 days of purchase for a full refund of the purchase price. Customer pays for return shipping.

  • What other models are you planning on doing Skinz for?
    • We are planning on developing Skinz for more model vehicles as soon as we can. We are currently developing Skinz for Toyota Tacomas. The next one we'll work on will probably be divided by how many requests we receive. We need about 300 requests for us to start on a particular model. You make a request for your vehicle here Vehicle Suggestion Form
Sponsored

 
Status
Not open for further replies.
 



Top