My Warn Tube doors arrived...

[Dcoins]

Nice jeep btw.

Can you guys take a few close ups of the Rear Tube doors? I am thinking of getting them for the kids. Wife and I run with no doors in the front, but feel may be frowned upon with no protection for my kids in the back lol.

What's nice about these is that you can lock the doors so that you can't open the doors without the key. So for example your kids couldn't open the door until you unlock them with the key.

Sponsored

 

[PJM86]

Yep, I’ll be buying a set of rear doors. Thank you for the pics. Nothing like locking the kids in...

 

[Dcoins]

Yep, I’ll be buying a set of rear doors. Thank you for the pics. Nothing like locking the kids in...

Copy that, enjoy the doors...

 

[Captn_Obvious]

I LIKEY!

 

[JCstud21]

Are these the doors for the JL, which end up fitting the JT?? Curious before possibly buying. Thanks.

 

[Dcoins]

Are these the doors for the JL, which end up fitting the JT?? Curious before possibly buying. Thanks.

Yes they are for the JK however also fit the JT

 

[Dcoins]

Yes they are for the JK however also fit the JT

I meant to say JL

 

[cbl1]

JL and JT same doors

 

[Dcoins]

JL and JT same doors

Correct, the Warn tube doors for the JL will fit the JT.

 

[Dcoins]

Correct, the Warn tube doors for the JL will fit the JT.

If you scroll up in these post there are the two links where I purchased my doors.

 

[Microday]

Those are the door lock mechanisms that Warrior Product doors use, had a set for my JK’s for 5+ years and they have several adjustments. However in all my Jeeps I found if you wrap the Jeep Striker with electrical tape it eliminates the rattles. I do the same now with my MOPAR doors

 

[JCstud21]

I just got my front Warn tube doors in this past weekend and just had to install. I was wondering if any previous owners had any trouble with the fitment on the hinge pieces?? I had one that almost seemed bent a little and extremely hard to force into and out of my JT hinges. Also, on a side note, I feel like the rubber door stop is the key to the locking mechanism not rattling. If you can adjust it correctly, it will put enough pressure on the door so that there is no rattling (in my limited experience so far). Still waiting on rear set to arrive.

 

[JCstud21]

I will also add that I really like the look of these on the Jeep and they feel really solid in hand.

 

[Dcoins]

I just got my front Warn tube doors in this past weekend and just had to install. I was wondering if any previous owners had any trouble with the fitment on the hinge pieces?? I had one that almost seemed bent a little and extremely hard to force into and out of my JT hinges. Also, on a side note, I feel like the rubber door stop is the key to the locking mechanism not rattling. If you can adjust it correctly, it will put enough pressure on the door so that there is no rattling (in my limited experience so far). Still waiting on rear set to arrive.

In reference the hinges, I installed them on the door loosely and the placed them on the truck. From there I made adjustments and the tighten the bolts down. I also eliminated the rattle by adjusting the rubber door stops.

 

[PJM86]

I ordered mine yesterday for the rear, still waiting for tracking....can’t wait.

Sponsored