That is a good option. I used usb “tv” lights on my Softopper canopy and a switched usb outlet. When I want to remove the canopy I just unplug the lights.
Thinking of doing the same. I removed the passenger bed light because it was blocked by my @813 Fabrication & Design Large Bed Side Compressor Enclosure and planned on using the wiring harness to connect to the courtesy lights. I would wire one zone to a switch in the enclosure for camping...
I set mine around 37psi and they will run about 40psi on highway. I run 20psi on trail most of the time.
This is also subjective depending on your load… if you are all stock with no load you should run what the factory markings say. If you have steel bumpers, winch, overlanding rig, lift, etc...
Last weekend we loaded up the JT with 5 days camping gear and supplies and drove 1500 miles round trip. We did mostly highway miles, but we did hit a trail 1 day.
While on highway - doing 10 miles over the speed limit - I heard a metal rubbing sound when we hit whoops in the pavement.
Looking...
I know this is an old thread, but I found a great product and wanted to share my experience.
I have a soft top and Softopper that is about a year old. Last month I was wheeling in the NC clay and sprayed it all over the Jeep. Even the roof was splattered!
I ordered Chemical Guys SPI_192_16...
@berb
Can you share a link for the mirrors? I have Quadratech tube doors and don’t like the mirrors. I much prefer the cheap Amazon mirrors I use with no doors, but have not figured out a way to make them work with the tube doors on (they mount in the top hinge).
Could not find a local event to join, so we did a lunch run before it rained. Lots of Jeeps out today. Some with tops down or off, some naked. We waved to all we saw✌️