Sponsored

Search results

  1. Battery Voltage question

    ok and i should be reading around 12.4 or better correct?
  2. Battery Voltage question

    So should I just check the main first with a multimeter? Should the negative post be disconnected if I do that for a true main battery reading
  3. Battery Voltage question

    I don’t have a charger. Does the dash show the main battery voltage?
  4. Battery Voltage question

    At least 30 miles a day. Back and forth to work
  5. Battery Voltage question

    It’s a 2022. I drive it daily. I just noticed that it drops like that at a stop start event
  6. Battery Voltage question

    When I come to a stop and my auto stop engages, my voltage shows 11.9. Does this mean one of the batteries is going low? When it kicks back on it goes to 14v
  7. Oxygen sensor

    Does the negative fuel trim on bank 1 indicate anything In relation to bank 2
  8. Oxygen sensor

    This was one of my JScan screen shots
  9. Oxygen sensor

    Thanks for the response I was hoping you would help lol. I had it at the dealer no cam issues they opened it up. I replaced all the plugs on that bank. Oem, and gapped. I replaced coil pack on cylinder 3 no difference.
  10. Oxygen sensor

    Could a down stream 02 sensor cause a rough idle? I don’t have any codes but counted more misfires on JScan on the right bank then the left cylinder 3 in particular having the most. I changed the upstream with no improvement. I saw there was a tsb for downstreams, but not sure if it can...
  11. Pcv hose

    Thank you ! I appreciate that
  12. Pcv hose

    Does anybody know the diameter of the hose from Pcv to intake? Thanks in advance
  13. 02 sensor question

    Is it possible for an Oxygen Sensor to get voltage and fluctuate voltage as designed but still have the heater element fail?
  14. Spark plug gap non existent after being pulled

    Has anybody had this issue? I pulled spark plug 3. No codes set but JScan was logging misfires (more then the other cylinders) the spark plug gap was totally closed. Is this from detonation? I’ve also read piston slap but don’t know if it can actually hit the plug. Any insight or help
  15. Assistance with compression test

    Hey all. I have been monitoring misfires on cylinder 3. No code. Coil and cylinder plug are good. I want to check compression. I bought the kit. Can you please walk me through and what should the number be ?
  16. Can anybody tell me how these numbers look

    Not leaking I checked them. I just figured the misfires that out weighed the amount on bank 2 where pointing towards something
  17. Can anybody tell me how these numbers look

    Also to add at idle when it’s vibrating I don’t see any counts of misfire it’s only while driving




Top