Search results

Here's where it sits now. Do I need it seeing as I'm rarely going to take it offroad? No. But I love the look of a good lift as I'm sure a lot more guys who don't go offroad do. I've had a '19 and a '21 Ram 1500 that I put lifts on and never went offroad with but I loved how they looked ...

I've had it for over two years and have yet to take it offroad. Wanted to but usually have something else more important but I would like to eventually. So I guess mainly just a daily driver.

Right now I have the leveling spacers on my Willy's sport. Considering a 3.5" lift but not sure how much higher it will be than where it's at now. Looking at pictures of others with that much of a lift doesn't look much higher than what mine currently is but I'm not sure and don't want to waste...

So I just got JScan to fix my lighting issues and I figured since I have 35s on it, I'd change the tire size to get the speedo more accurate. I checked out a couple videos just to be sure I was doing it right and found one where one guy not only changed the tire size but he went as far as doing...

So got the cable and figured out how to get it all the Jscan stuff working and enabled all the LED lighting. Went for a five mile ride and the lights stayed on the entire time. Thanks for the help guys.

Got Jscan and enabled the LED tails. No more alarm.

Yep, I'll get the stuff tomorrow and hope it's the solution. The originals are halogens and I have heard of having to tell the Jeep that they are LEDs. What I still don't get though is the ones I replaced are LEDs and I never had to do anything like that. They worked fine every day for a year...

I was thinking the same thing. Maybe I just got lucky with the previous set. They are led also but never had a problem. So, jscan downloaded, cable and compatible scanner ordered. Will get here tomorrow. Hopefully this fixes them.

Waited til dark to see if they were still acting up. I tried to do some reading about htis and though maybe turning off the DRL option in the settings would help. Maybe it was somehow interfering with the lights. Started it up and immediately the right one did flick of for just a second but...

I've had an aftermarket set of LED headlights on my '21 JT for about a year and a half. I decided I wanted a different look so went with these: https://www.amazon.com/dp/B0CRDRJCQG?ref=ppx_yo2ov_dt_b_fed_asin_title I got them installed them on Saturday. Everything went fine and worked fine...

No, they do not have the attached resistor. Did not do a refresh for LEDs. I also have LED headlights, fog lights and fender lights which including the tails were all put on around the same time and up until now (about a year and a half) have worked just fine. I am also thinking it's just...

I have had these tail lights on my Gladiator for over a year and a half with no issues: Amazon.com: WOLFSTORM Smoked LED Tail Lights for 2019-2023 Jeep Gladiator JT Accessories,DRL and Sequential Turn Signal Light Design, Plug & Play Taillights, 30W Reverse Light/Brake Lamp,1 Pair : Automotive...

Actually they said front 3.5 rear 1.5. I actually think this level has my front a little bit higher than the rear but it's not really noticeable. So that 3.5 would potentiality level it perfectly bit I still can't justify 1500ish for just another inch in height. Thanks for the compliments. I...

Just chatted with RC. I was right, it would sit 1" higher level than it does now. Not worth it in my opinion for the $1,300 it would be for the kit plus install and I'd also be wasting the 350 for the level kit and install of that. Guess this is as good as it gets.

If that were the case wouldn't I still have a rake? This kit says it levels it.

Yes, the leveling kit is spacers and a few other parts went with it. I didn't do it myself, I have a local shop that does it. I'd be having the level removed and the full kit put in. I'm looking at one of the RC 3.5" kits and they say it does remove the rake. So if I understand this right it...

I have a 2.5" leveling kit on my willys. I'd like to go up but not too much. I want a 3.5" full suspension lift. My question is overall after install will it sit just 1" taller than it does now or will it be an additional 3.5" from current height?

Got them on today. Looks perfect to me. Glad I went with this one.

I actually did order some so I will be using them. I figure why not.

Ok. I'll have 35s. If I read right they will stick out just a bit more which I think would be perfect