Search results

My rubicon has 4.10 gears and I run 35x12.5 and it runs great...not a dog at all.

Camber, I read when ball joints go bad it can make your camber be out of spec. Because knuckle can move side to side

I was curious because my camber is .04 driver -1.3 on passenger side

So will bad ball joints cause camber to be out of specs?

Mine is also bubbling on the hood on ds lip above fender

I did it to my rubicon and had zero issues with the teraflex. Don't overthink this mod.

Fabtech say set to factory specs , but everyone with lifts say run 6fegree caster

So I am running 3in lift on 35's with Rancho geometry brackets. I got core 4x4 control arms on the way. But not sure if I need them. Gladiator seems fine but like some opions.

Yes, they fit over the rubicon rock slider just can't use all the brackets. But they are very solid.

Yes here is my Rubicon

?

What your recommendation for 3 inch lift? Do you recommend geometry brackets?

Ok so leaving the alignment Shop posting the pics. Maybe you can help me with this. This is with the Rancho geometry brackets. The core 4x4 control arms on the way. Really debating on taking these brackets off .

My Rubicon is on 35's and 3inch lift it came with oem 4:10 gear set. You are good till you go up to 37's

Fabtech sucks ass, I hate mine with dirt logic reservoir shocks. I got a shock leaking and no help from them on warranty just crickets. Not to mention called support during install they was rude and like u was a nusinent.

Didn't have to lift the axle to attach, had to push the shock up. I finally got it with the correction pads driver is perfect and pass has a very slight bow to it. Now to alignment shop new Sunday. Trying to figure out either to run adjustable lca with the geometry brackets. I heard both ways...

Had to compress them they was about 3 inches longer than mount

They came with the kit from fabtech

I'm to the point either order synergy springs or put it back stock.

Well that's what I did and it actually reverse the condition. Now I'm putting in spring correction pads. As this was built in 7/20 after covid. Thinking alot of things change when they assemble it. Because I order powerstop brakes for a rubicon and the front wat fine but the rear has standard jt...