Search results

well done - the window opens to 12 1/4” so the 12” actuator should be perfect. A wedge of foam in the latch would probably hold the latch open without the need to drill.

. This would probably just pop the studs out… I had this same issue years ago - seemed like the rust/dust from the vented rotors settled around the hub and welded the two together… I heated the hub and used the bolt to apply pressure to the rotor while I rotated the rotor and beat it with a...

do you have a link for this?

Second these - also does not interfere with Sunrider. I prefer these over the GPCA…

@WOLFBOX - Website says BSM is optional upgrade but has no way to add option to the order. Is this not available for JT’s and JL’s? I’d like to jump on this deal but do not want to give up the BSM.

Your gator with Gobi/tan hardtop looks great. Do you have a write up for the process you used?

Would be nice if those Ram bed lights fit the JT so we could have a switch in the bed for our lights..

I’d just keep the new wipers under the seat until the next rain storm… maybe even swap back to the degraded wipers after the storm passes.

Just to derail this thread slightly - gator next to ‘41

I’m curious how you protect the connectors when you are not towing the trailer? Does Wolfbox not have an extension cable to make wiring to a trailer plug and play?

please post a link on your trailer cam install. thx

Those missing pieces are part of the top rail. They are Cut out when installing the mopar tonneau cover.

Do you have a parts list of components used with the mount? Thx

Did you pot the locker sensor?

Adding this - https://www.amazon.com/Werks-Gruppe-ChargeSafe-Disconnect-WG-MCA-002/dp/B0CV3DLFRX - would eliminate all the worry about driving off with the charger still connected.

If you are getting icing at the corners, you need to block some of the center vent openings so the heat goes to the sides. I think that is why you see so many Jeeps with ducks on the dash!

I also have the smartliner. - it has a “beveled” edge that would likely prevent the interference experienced with the gap filler. I use a rubber entry mat as my gap filler. It’s long enough to act as tailgate protector, and folds over into the bed when the tailgate is closed. It is just short...

I thought this thread was going to be a breakdown of @ShadowsPapa finagling the build for his wife’s new wrangler…

That would look better if it was just a round hole for the lens and did not have to allow for the camera housing.

Strategically placed ducks will prevent vent plugs from popping out…