Search results

i used the ARB mount kit which comes with a switch, so you wire straight to the battery. You can use it with the ignition on or off, but you should really only use it with it on.

I have dual ARBs mounted in our JT and JL under the front passenger seats. The install and wiring is pretty simple.

I average 25k miles a year on a vehicle with 30 miles round trip to work and the rest recreational. Another 15k a year would kill me. Out of curiosity, how much of that is work and how much is recreation?

80k miles! On a 2020?!? HTF?

same reply from my days of driving my Saab or my wife’s WRX…any modern car is going to be designed to run a fan at shutoff it engine cooling is needed.

Have you taken it to the dealer since it is under warranty (unless you have really high mileage)?

I have a similar sounds in the first 200 of driving after the truck has been parked for a few hours. It goes away after 5 seconds. I keep saying I a, going to pull the wheels to investigate but always run out of time.

I have a creaking sound on my JKS lift. The shop replaced all the nuts with "all metal locking nuts". I am familiar with nylock nuts, but not some all metal locking nut. It stopped the creaking for a few days and then started again. Now they are talking about using red locktite to fix it...

I am good. Thanks for helping out.

Thanks @MarkyMark80 and @Hootbro , I will check that tonight. With you guys and @mtudb24 voting cowl drain, i bet it is the problem.

it is not the heater core then.

yes, the drain plug is in properly and even backed up with a section of bike tube. It happens regardless of weather.

Thanks for the suggestions. The AC appears to drain freely, though I suppose there could be a partial clog. I will inspect more closely. I will check the cowl drain tomorrow, I did not even know there was one. Would the heater core leak in the middle of the summer? Where is it?

Bump

My situation is a little different since I cannot see out of my back window at all, but I added a Brandmotion FullVue camera and love it. If you determine you need more visibility, check them out.

I have seen people paint it but have not seen it replaced. What do you dislike about it so much? I have added some additional orange highlights to mine but truck but left the skid plate plain.

You either have small hands or that is a huge hose. Nice job, I need to make one.

There are two power feeds for the camera. For one I used this harness https://www.quadratec.com/p/quadratec/12-volt-power-adapter-jeep-wrangler-jl and for the other I ran a wire straight to the battery for constant power.

Hopefully there will not be issues after the fix, but it is good to know it is not terribly expensive to fix it if needed after warranty.

let me know what you come up with, I am tired of my rack dragging.