Search results

New Metalcloak bumper with 49” “krawler light caps”. Wanted a clean simple shorty with lights. Decided I’ll purchase the skid plate that goes with it after all for the low hanging fruit. It’ll just be cleaner than cutting the stock skid to fit. Thanks to @Metalcloak for sending me a discount...

I see you have the MetalCloak relocation bracket on the falcon stabilizer. For the fox are you just using the stud that came with it? Mine rubbed a tiny bit on the tie rod, but I was told the MetalCloak bracket wouldn’t work for the fox ats.

Which mount is that ? I need a ball mount on the dash so I don’t have to remove the cam to put on my sunshade

Mine does it more when it’s under load. Like a hill, pulling my trailer, or AC on.

Dealer replaced my throttle body and PVC valve last visit and I still have a weird idle, especially at 700rpm when I’m inching up the driveway or backing up real slowly. Runs fine if I’m on the throttle above that. I Just replaced the manifold air pressure sensor yesterday and seemed better but...

My 2020 has been doing this since they replaced my heads at 40k miles. It never did it before and now it does it. They have relearned it, then changed the throttle body and pcv valve. I just changed the map sensor myself yesterday and it seemed better but still does it. Just off idle around...

arm was definitely bent. Drag link end is fine. Splines are fine. In case anyone cares, there is 1 fat spline, so the pitman arm can only go on one way. Can’t adjust it. Which is cool, no guess work or marking where center is. Putting it all back together now I’ll get back with an update once I...

@Gvsukids confident in my band-aids 💪 @TinMan2020 I’ll have to ask my insurance person, I literally just removed it a couple months ago when I switched to state farm 🤦🏽‍♂️I was under the impression uninsured motorist coverage was only for medical and wouldn’t cover vehicle. So I removed it...

@XraytecH I have been eyeing the CavFab 2.5 ton steering for a bit 👀. Will start with pitman arm first tho @CrazyCooter My service guy said we may be able to warranty out the gearbox if it’s damaged once I fix the pitman arm myself. Im also worried with the force that bent the arm, how the...

I turned the pitman arm to match my red arrow marks for center, and lo and behold, steering wheel centered, wheels pointed to the right quite a bit. I was able to find an old picture of my brace install. Def the pitman arm bent. Steering box might be okay after all. @kevman65 The tie rod on the...

Yea it’s def other drivers fault but I forgot to mention it was a hit and run. Driver fled as soon as he stopped spinning. We stopped ahead because it was at an intersection and when I looked over they were gone. That’s why I would have to use my own insurance. We didn’t have time to get the...

@arosen1997 thanks, love these yokos(except the small rocks that wedge between the tread occasionally). And for that advice, ill do that. I’m trying to just figure this out without insurance. I just filed a claim last month on the 8th due to a theft attempt. They broke 2 windows, my glovebox...

Smacked a car that ran a red light last night. My girl was driving and didn’t have time to stop. Long story short I need a new bumper and my alignment is off. Nothing looks bent but I can only turn left a tiny bit and I can turn right a lot. I can see that the steering gearbox pitman arm is...

Still loving it? I just hit a car last night when they ran a red light and it’s time to pull the trigger on this bumper. Had my eye on it for a couple years now. Unless there’s something similar that might be better for whatever reason.

They just got me last night. Broke both driver front and rear and broken glove box handle. They used a key programmer in the OBD2 port to try to steal it but I have a 4122 killswitch that saved me. Wiring seems fine. I’m debating just using my $500 deductible since it’s all 3 of those things...

Ok thanks for that info. Makes sense. I’ll have to figure out how I can read the vacuum. I have a vacuum brake bleeder kit, maybe I can use that. Oil filler tube like the main cap where the oil goes in?

After some further research, the hose im talking about is actually the “Make Up Air Hose.” There is oil coming into my intake tube from this hose, it connects at the back of driver side valve cover, and connects just after the air filter on the intake tube.

Would we need 2 catch cans ? I saw oil enter from the hose right after my air filter. The hose that plugs into the back of the drivers side valve cover. On the mishimoto install video, they are catching the oil from the hose that plugs in hear the throttle body.

I’m about to flush mine and decided on Pentosin Dot 4. I’m going with the “Super Dot 4” vs the “LV” since I live in the desert(Vegas).

Has it held up?