Search results

https://www.jcroffroad.com/LEADTIMES.html

We had a crossbar shortage that we were working through. Did you order direct from us or through a dealer? If you ordered direct, please reach out to us ([email protected]) and we can get you a status update. If you ordered from a dealer they will have to do it. Sorry about the wait! It's been...

Licorice on one side, extinguisher on the other. Haven't seen that opinion on barrel locks, just padlocks and such like you mentioned. You may be able to make a padlock work somehow, just not as clean. Did he pay you to say that? JK he's a good dude. If you didn't get any in your package...

Thank you! We have spent a lot of time, effort, and money on packaging in the past few years :rock:

This top looks great @Bestop! We've been really digging the functionally of our SoftTopper and have a compatible bed rack in the design phases right now. Hoping to verify compatibility with both brands :like:

The rack looks great! I''m looking into this awning mount thing for you, I know we've had an awning on our JT. Will reply back asap.

The extra hardware is because we use the same hardware pack on multiple products to save shelf space in shipping and receiving. We apologize for the confusion on the rack install hardware, we will update the PDF document to make it more clear what goes where as soon as we can. We also have...

If you wanted it PC you could also just grind and lay a bead on the inside hidden areas and just touch up those spots.

This could be because of loose bolts, or it could have just been enough force to move the two parts (which was a lot, nice job :like:.) Should be able to re-align and retorque the bolts. You could likely step up to a larger bolt size as well to take up some of the adjustably we give you there...

That's not how our manufacturing process works, unfortunately. Parts and pieces for fabbed items are cut in batches, and that final product doesn't get assigned to a customer until it gets received on the floor in shipping and receiving. So anything custom like that would have to be followed...

The light holes will most likely not work with flush mount lights unless you modify the bumper. We only offer it this way currently.

Sale price shown on the product pages, no code needed :like: https://www.jcroffroad.com/category/HOLIDAYSALE.html

The sliders vary from 3.5" to 4" down their length.

Just email customer service and we'll make sure you get the updated version: [email protected] That goes for anyone reading this thread.

1. What do you mean specifically by rear step? I took some shots of what I think you may be talking about... 2. This is going to be hard to really give you a solid answer on as the tire size and offset will really change this a bit. Here is a measurement from just under the taillight where the...

Some flex at the tire is going to be normal. We see a little with our 37" tire. If you see a lot, you want to make sure that there is nothing obviously loose (bearings, bolts, etc...) and you want to make sure the tire is tight against the carrier itself. If you shake the tire and can't notice...

Chris did mention it and we investigated further and noticed a design change to the drawing that never got finalized in production. It would give some more adjustability on the panel. We will let Chris know to get a hold of you on a replacement. We aren't trying to be nefarious. It was a...

You'd want the JT version of this kit. It includes the option to mount your plate on the swing too If you like. https://www.jcroffroad.com/product/LPRLC2.html

I put a message in with our engineering team to see what could be up.

https://www.jcroffroad.com/BLACKFRIDAY2020.html