Search results

No idea what RH is supplying now, if that 160mm is a typo, or how they are measuring the bolt length. This is the front LCA axle side skid with the bolt with 150mm shank length: Rear frame side skid, 150mm bolt shank length: And the rear axle side 120mm bolt ends up with this many threads...

How much do you want to spend? Not a great picture, but here are the Baja Designs LP4s mounted on my old OE steel bumper: BD LP4 steel bumper kit They also have a kit to mount the larger LP6 lights the same way, but I went with the smaller LP4s to minimize any obstruction of airflow to the...

Finished up the install of the RSE step sliders and skid plates. Even with an induction heater the body mount bolts were still nerve wracking. I guess the quote "What doesn't kill me, makes me stronger." applies here. Did the install by myself, so a lot of blue painter's tape was used in...

End of January I paid $760 for Gorilla Glass out of pocket, no insurance claim. If you're in metro Phoenix, particularly the east valley, here is the place I used: Safepro Auto Glass Chandler

You have chosen wisely.

Disclaimer: I do not have a background in chemistry, materials science or mechanical engineering. Here is a link to the retail versions of Loctite threadlockers made by the Henkel Corporation: Loctite Threadlocker Properties Chart I have used blue, red and even a green loctite once. The...

I have the RH front and rear axle side and frame side LCA skids. The front frame side skids are still using the OE bolts and nuts. I immediately uninstalled that one RH shock skid. Never ordered longer bolts for them. Yes.

Belmetric is where I order metric bolts from. I was pissed that (at least when I got them) the RH rear shock skids had you re-use the OE bolt, which was too short given the thickness of the skid. Got the first one put on and torqued, then saw that the end of the bolt was inside the nut, not...

You find it interesting that a company that sells replacement parts would encourage you to buy more replacement parts from them? ;) Which is why I wrote that I have reused the gaskets multiple times. They are some sort of rubber with a metal core. Treat them gently, you don't want to nick or cut...

Don't yet have all of the tools that I'd need to do that. Have never replaced ball joints or tie rod ends.

The instructions that come with the mopar replacement diff cover bolts that have the pre-applied thread sealant: You're trying to get a nice even squish on the gasket. I've reused the rubber gaskets when I put the new diff covers on and when I had to replace the locker position sensor. The...

That's what I get for following instructions. Thanks for the tip.

The Bilsteins are the shocks that I got with the Mopar 2" lift. The little LED puck lights are from Amazon: https://www.amazon.com/dp/B0DKRYW4N8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I used to have 6 of them, now I have 5. One of them went for a ride and fell off somewhere. :CWL:

Finished installing the RCV front axles. They are so very nice. The before: The after: I'd still be out there working on it if I hadn't stopped and made this "backstop" out of scrap 2x4 so that I could just focus on pushing the CV joint into the boot. (Yes I had the zip tie between the CV...

Here is the charging head: https://www.quadlockcase.com/collections/shop-mounts/products/mag-wireless-charging-head But you need to have their matching case for your phone for it to fit on the mount and work. Here is the one for my iPhone SE...

Here is the USB charger: https://www.amazon.com/dp/B0D66VC3C1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Got those because they didn't have lights, were low power (only deliver 24W max (not per port)) so that wouldn't come close to the 10A fuse on that ignition wire. The USB A to USB C 90 degree...

No, this is on my 22 JTR. I've got the Aux switches so these USB ports are wired to the ignition wire in the passenger footwell.

Finished adding a second set of USB ports to the top of the dash. Put the first set in last year and used the two ports for a Gopro and an iPad mini that runs OnX Offroad. After the last offroad trip we did, decided that it would be nice to have our phones more easily accesible (previously they...

I have the Clayton rear track bar.