Search results

Installing a Renogy flexible panel on top of the RTT. The lead wires are too short to route under the RTT to make a MC4 connection. I really don't want the MC4's hanging out on the top of the RTT (wind, rain, UV). I will use metal connectors with a heavy-duty crimp tool and solder the ends...

I'm using the Blue Sea wire selection chart to determine cable size for the primary run from start battery to house battery in the bed. The run will be between 15 and 20 feet. I have a 120AH battery, 200W solar panel, Renogy DCC50S charge controller. I'm not sure whether to use the...

I wanted this tank, but Ironman 4x4 has been out of stock for a couple months or more. I called yesterday and they said "maybe next month", so I started searching. I found it at Nomad Overland Adventures in WA for only $149 and free shipping vs Ironman at $229!! He said they have two in...

I can't say this is new, but I just noticed it. Driver side near rear tire, the frame has an oily residue patch. I inspected the brake line and it's all dry. There is an axle vent tube that terminates in that area, but it is also dry. Any ideas?

I wish there was a sub-forum specifically for battery and solar systems. I've searched extensively and have not found what I'm looking for. I'm a novice at battery systems and could use some help with basic design, component selection, etc. I have decided on the KickAss Slimline 120AH battery...

WeatherTech Floorliner HP, over the hump rear mat. New, in the box, never opened. Will ship at your cost. This is a stock photo to show what it looks like. The box is unopened.

Make your own bed plate! I bought two pieces so I could screw one up, but I didn't, so have an extra. This 5 x 5 Baltic Birch is very hard to find. I used the one I cut for my Gladiator to draw a template on this one. Ready to cut, coat with bedliner, and bolt on. Picture shows the cut...

I have searched the forum best I can and have not turned up any good intel. I want to make a DIY slide using slide rails that bolt directly to the bed plate rather than the kind that have to be in a cabinet. All the premade products are too expensive and I only want something that's about 24"...

I have read a bunch of posts about the stock 110v being modified sine wave that doesn't work with an EcoFlow type battery. I want to do something to be able to use the 110v outlets. Can the stock inverter be replaced (where is it)? Is there a "modified to pure converter" or adapter? I've...

I've read a ton of posts about this problem and they all point to possibly a bad battery. I've had the ESS and Aux Switches not available battery charging message for a couple of weeks. Just got it back from the dealer they said both batteries checked out OK no codes couldn't find anything wrong...

Bought a full set, then decided to do a rear seat delete. This rear mat goes over the hump. It's brand new, in the box, never opened. Retail is $80 plus shipping, will sell for $50 plus shipping. https://www.weathertech.com/jeep/2021/gladiator/floorliner-hp/

I'm getting a Contour Canopy, RTT, and solar panel. How do you route the solar panel wire to get it inside the canopy to hook it up? I have looked at dozens of canopy pictures and searched this forum, but cannot find an example.

My aux battery is in the bed. I'm getting an AC Contour Canopy and iKamper 2.0 RTT. What is the best way to route wiring from inside the canopy up to the RTT?

I got a PM from a member a few weeks ago, now I can't find it. Where are PMs? I've looked in every forum menu I can find!!

Come pick them up! In Fort Walton Beach FL. Will not ship.

Just installed the Rock Hard Patriot bumper and winch. Maybe it's just my OCD, but I hate the three winch wires hanging out like that? I'd like to reposition them so they go down rather than to the side, so they're unseen. I believe there is enough room to route them down. Before I remove...

Specs say the base weight is 5,072. I added the Mopar 2" lift kit, Falken 35x12.5 MT's, and ASFIR skid plates (70#). I just weighed in at a CAT scale at 5700#, full tank, nothing in the Jeep, not even me. How did it get that heavy? And with GVWR at 6,250 I'm now worried about adding Alu-Cab...

I have read everything I can find on this. With nothing plugged into the bed outlet, I double press the switch under the headlight switch panel, it blinks five times, goes off. Outlet does not have power. Nothing I have tried makes the damn outlet work. The outlet behind the console works...

I've done two long road trips and noticed on both that about once an hour the A/C will blow hot outside air for about a minute, then return to normal operation. I use Auto mode and recirculate is off. Recirculate off should allow a little outside air at all times, not a blast of outside air...

Hey gang! My first Jeep and I'm LOVING IT!!! Have had two RAM 2500 4x4 Long Bed Diesels in the last 20 years. Had to buy a Nissan LEAF daily driver because the RAM was such a PITA to park. Don't know why I waited so long to get the Jeep, but damn glad I did. Just picked up this '21 JTR...