Search results

I disconnected the door check and pushed it into the door and replaced it with a longer strap, so the door would open wider to make it easier for my dog to get in and out. now that the dog is gone I would like to pull that door check out and reattach it. I have pulled as hard as I can and it...

Neither seat heater works, the buttons do not light up, and the fuses are okay. I know there is a Comfort Seat Steering Wheel Module under the steering wheel. All wires are firmly seated. Is there a way to test this module? I also read something about a loose clock spring under the air bag...

This multi-stage, multi-input battery charger can charge a service battery from a starting battery linked to an alternator or by utilizing solar panels connected directly to the unit. While your vehicle's alternator prioritizes your starting battery, this unit will allow your solar system to...

Got the EOC Stage 1 tune installed. Need to drain the DEF, but no idea how. A siphon tube down the filler hole does not work. Anyone know the best way to drain the DEF?. Is the DEF tank behind the gas tank? Everything is covered in skid plates, so I can't see it. Any advice appreciated...

I'm getting the EOC stage 1 tune. There are three options for the tune and one for DEF on/off. I'm looking for feedback on your experience with an EOC stage 1 tune. Which one did you get, how does it perform, is fuel consumption better or worse, would you do it again, etc. Your feedback is...

I really can't believe this happened and I am so depressed... Just finished installing the SolarHawk panel on my iKamper. Now I find out the Renogy DCC50 max input voltage (VOC) is 25v and the solar panel produces 28v. Are there any options to step down the panel's output? Any other...

Just got new RPM 2.5 ton drag link & tie rod, Teraflex ball joints, Falcon steering stabilizer, and Clayton 2.5" Overland lift. Steering had some play before, but I thought the new steering parts would tighten it up. I still have a good bit of drift. And a new thing started, when making a...

I didn't think four nuts could be so difficult to remove. The top two, no problem. How do you get to the bottom two? I'm sure I'll have to remove some other components, but thought I would ask for help before just ripping stuff out. I can't get a swivel and socket on the bottom passenger...

First, the shop has called Clayton and I'm talking to James with Clayton on this forum. I thought I'd see if anyone has experienced this or if anyone has any feedback. I swapped the 2" Mopar lift for the Clayton 2.5" Overland Diesel lift (plus control arms, stabilizer, RPM Steering). These...

I've searched and searched to no avail. How do you route the wire from the roof rack to the engine bay? I don't want to use one of those stick on windshield channels and really don't want to drill the roof. The light bar is an Ironman 4x4 50" LED. I saw this setup on this forum, but have...

I want to install the stage 1 tune from EOC. From info learned about this process, I have to buy a new PCM and have it cloned to match my stock PCM. The dealer said they would remove the stock PCM, install the new one, then program it. Is that the same as a clone? Just want to make sure I"m...

I want to do the stage 1 tune from EOC. I am in line at the dealer for a new fuel pump, about 3 months out. Does the ECU require a flash after the new pump is installed? Won't that overwrite the tune? If so, I want to wait on sending the ECU to EOC. Advice appreciated.

This fits Alu-Cab canopies for JT’s. It is virtually brand new. I installed and took one camping trip. Decided I wanted to arrange my bed differently, so it’s for sale. New cost is $299. Selling at half price, $150. Pickup in Fort Walton Beach FL only...

This fits Alu-Cab canopies for JT’s. They are virtually brand new. I installed and took one camping trip. Decided I wanted to arrange my bed differently, so it’s for sale. New cost for all was $550. Selling at half price, $275. Pickup in Fort Walton Beach FL only...

Looking for ideas for mounting the boards to the inside roof using the M8 rails. I could use long M8 bolts and wing nuts, but the on/off process would be difficult through the side window. I could use four of those eyes and camlock straps, but it'll probably loosen and rattle. Wanted to see...

I have the Mopar 2" lift with Fox shocks, Hellwig sway bar, and Wildpeak 35's on my JTRD. I'm outfitting it for overlanding, but it is also my daily driver. Have a Contour Canopy, iKamper RTT, winch, water tank, house battery, fridge, slide, plus camping gear, clothes, tools, people, dog, etc...

I bought over $5000 of Rock Hard bumpers, winch, and skids last year. Everything was top rate quality with one exception. The control arm skids come with longer bolts. After two months, I notice the bolts were severely rusted. I don't want to be in the middle of nowhere and have make an...

I have an iKamper RTT that covers part of the rear of the cab. I need a roof rack for the front. This Slimline II rack shows it mounted on the rear of the cab. It's a gutter mount, so I don't see why I couldn't mount it all the way forward. The rack is 37.6" and I have about 42" from the RTT...

I have this 10.5 gal tank by the cab. Looking for help with setup; hose, fittings, etc. I plan to make two hose routes, one gravity fed and one with a pump. I would like to terminate both routes at the rear by the fridge (see photo) with quick disconnects. Would appreciate any water system...

I plan to put these bins on a slide. Looking for clear plastic bins that don't have handles that stick out like the ones in the picture. If the sides were straight, I could make use of those few inches between the boxes and the fridge. I wish Wolf Pack boxes came in clear. Anyone know of...