I’ve been able to get warranty replacement on each taillight at-least twice . My 3rd passenger replacement is now completely non functional after receiving it in February. While it has they have been great at replacing I don’t think they are going to do it this go around. Luckily I have my old...
fwiw
I went to take pics and video of my newly replaced passenger side (4/2023 date code ) and after I unplugged and plugged back in it started working. I doubt it is permanently fixed.
Driver date code is 6/2023 and was also replaced last September.
I’m having issues with my passenger side again after replacement back in Sept 2023. Brake, running and turn signal are very dim. Replacement driver side still good.
What is going on with these?
Yeah I’ve read the threads. I’m sure it is a bad sensor and I’ll either get the bypass or get the new replacement sensor. Can I assume that the locker is actually not engaged? I think all the symptoms I’ve read are the locker lights flash and you have a warning on the dash. This eventually will...
I had the flashing lights showing the rear was trying to engage. Now the rear locker shows engaged constantly.. I have the Tazer and I still haven’t seen any codes. I’m going to order the bypass but is this a different symptom?
2020 JTR mine is out as well. Found the video to replace it. https://www.jeepgladiatorforum.com/forum/threads/gladiator-3rd-tail-light-replacement.45771/
That definitely sounds similar. Interestingly I always have it after i have parked in a cool area like a parking garage for a few hours. It goes away after a few feet of driving. It seems to be rotational but doesn’t seem to speed up with speed.
My sound seems to come from the front. They could not replicate at the dealer this week.
I will eventually install a big brake kit on mine since I’m running 37s.
This is mine. Goes away fairly quick and isn't rotational. ie pitch and speed does not change based on vehicle speed.
https://www.jeepgladiatorforum.com/forum/threads/squeaking-noise-when-turning-the-steering-wheel.28077/post-1025266
see my post about mine, https://www.jeepgladiatorforum.com/forum/threads/37%E2%80%9D-spare-tire-list-of-tires-that-fit-under-the-bed.24091/post-915856
If I got the Clayton track bar it would not rub it. Fits between the frame rails without issue.
I got it up and under. It is against the MetalCloak gamechanger track bar. I deflated to 15#. Does anyone see a concern with this for daily driving or road trips? I'd remove for wheeling.
I'm going to try to fit my 37x13.5 Toyo RT under today so I can use my whole bed traveling to the coast. I know it is shown not to fit but I gotta try. Are most of you removing the heat shield? Mine is already removed.
I have not. It actually went away for a few days but is back. To me it seems brake related. I seem to feel a pulsing if I get underway without and right pedal. I also had gears put in and my tech couldn’t find the actual source since it doesn’t last long.