Search results

Is there an easy way to route cable from the cab to the bed without going through the firewall and engine bay? The cable RJ45 and is not rated for the temperature in the engine bay.

2021 Gladiator Rubicon Suspension for sale $275 OBO. Selling as a set. Front & rear springs, front & rear shocks, front & rear track bars, swaybar end links, 8 control arms. No issues with anything, removed at 3900 miles Located in west Houston TX. Can meet within a reasonable distance...

Like new, only driven on the street , includes mounting hardware. $100 OBO - Houston area.

I ended up making one for about $150 plus a couple of hours of time. $70 for the 5'x5'x1/2" Baltic birch and $80 for enough roll on Raptor liner to do 2 coats on each side. Does no look as polished as the Goose Gear one but it works and once I put a fridge slide and some other things on there...

I am looking for something like the Goose Gear Bed Plate but would prefer not to spend that kind of money on a bed plate :-). Does anyone know of another brand? Or if you built one yourself how did you fix it to the bed bolts nylock nuts and washers, rivnuts in the bed? Thanks.

I don't see one

Turns out this nut was missing from the brake booster. Dealer replaced it and all is working properly now.

I am having an issue where sometimes when I start the Gladiator, put it in drive and release the parking brake the foot brake will not hold the vehicle stationary have to hold it with the parking brake if you can’t move off immediately. The pedal feels about the same as normal , but it’s like...

What did you use for the feet? Do you think 1/2 inch ply would work for the drawers, mostly because of availability of Baltic birch ply. Probably only going to make them 40".

I am liking them so far but not had much chance to use them yet. I think the blue trim ring is close to the hydro blue, this pic may give a better idea of how close. For the wiring I am running a switchpros and have the backlight and main light on separate switches that are set up so that if you...

Got a set of KC Flex Era 3s, the orange backlight is cool.

I was speaking to KC tech support about installing these with more that 6 lights and a switchpros, they said you can have up to 11 lights on the fused bus bar they provide.

Thanks for the info, looks like I will need to plan a install party :)

How easy is the canopy to install with only 2 people to lift and maneuver it? One of those people is short. And how long did the install take? Anything to watch out for during the install that's not covered in this thread already?

The issue I had with the Uconnect was after the Genesis issue was resolved. I had just not let the Uconnect boot up fully. The issue with the Genesis install is with the 2021 models where if you do not leave that negative cable attached the Jeep will be completely dead, no lights when you open...

Yep the Uconnect went back to normal after about 4 hours :-)

Yes that did help, got it up and running, Thank You. Now I just have to figure out how to get the off-road pages to show up in the uconnect again and for the AC to show a setting other than lo.

Did you ever resolve this? Having the same issue. Have 12.8v to all 6 connections to the fuse box and all the fuses are seated correctly.

Is this a grounding stud on the drivers side of the engine bay

Thanks for the info guys