Search results

Done and finished early! The kit comes with the 4 bottles. I made it through 3 and it is on THICK! I am saving the last and order another set to do the factory hard top. Will update later today when the top is dry and back on the vehicle.

Forst 2 bottles used for a decently heavy first coat. Got about an hour left for the lat 2 bottles. Should be done by 11am.

Us old guys barely sleep anymore. Always up by 5… only way I can drink a cup of coffee in peace until the kids get up :) Sun is up in about 45 mins and will grt it done.

I sanded by hand with 220 just to scuff it. Took about 2 hours. Will wipe it with paint thinner and spray it to get all dust/contaminents off then coat it. I am using the Raptor kit spray gun and using my tiny compressor to speed it up. Will start in about 2.5 hours…7:30 ish. Should have...

Yea… there are soo many options. This one has thr built in rails on top. They are taped up. Has the LED light system inside as well and screen vents over the windows. Really nice setup. I liked how it is even witht he roof of the jeep and can access the shell from the inside of thr...

Well… could waste time tonight. Went ahead and did a 220 grit sanding. Got it all prepped and will wipe it down in the morning. I should have id one earlier amd will be back on tomorrow by 5 pm. Have some new rubber stripping Onam going to put on the bottom and then done.

Went and picked this up today. In GREAT shape…just the WRONG color…. Did a 10 hour round non-stop trip. Got it for $2k. Got home and immediately started prepping it for RAPTOR lining in black to match the hard top. Will post more pics tomorrow of the sanding and prepping as well as...

Jeepers: I did the 1.5” Teraflex Spacers to the front of my 23 Mojave. I have a front push bumper about 80-90 lbs Some stuff in the bed…sky jack lift..shovel and the metal molle panels. Nothing too big. TERAFLEX 1.5” : You can nkt realy look at or consider the wheel to fender gap...

Yesh… most of us have done some form of this when doing headliners in the Gladiators. Really any decent thick sound deadening will work well. I got mine from Amazon and used it when doing my Hot Head liners. It has worked very well. I did not do the floors but there could be an advantage...

For looks :) Depends in traveling…. Sometimes a lockable case… thinking of a awning system though which would make tailgating at games a tad more comfy.

Yeah….ok. First toncall bullshit on this. I said the same on my 23 Mojave. Lasted until i got home and had packages waiting.

I am picking up a ARE Bed Topper (Camper Shell). Same roof height as the hard top. Complete with lining inside, LED lights and locks with keys. Its a different color and will be immediately stripped when home and a Raptor Lining done to it by Monday evening.

Is there a need for an Alignment after the instal of the Teraflex 1.5” spacers on the front?

Sooo my .02 I have a loaded out 23 Mojave with 8.4. I put the tesla tablet screen in amd up graded all speakers with MB Quart (top dash, knees and overhead). Added a kicker 10” powered sub. The big screen was fun but as stated on here there are issues with them. Its hard to hear phone...

With my 1/2” driver seat elevation spacers mine fits right under my seat with easy access. Can pull it from the side or atraight out the front part of the seat.

In short… no you did not get a good deal. Give it 3 months and come back and tell is what you spent on accessories that you really didnt know you needed ;)

No prob! The time consuming part is nust running the lights to the engine compartment. That alone took me about 7 hours.

Yes. Very easy. 1. Run all rock lights to the hood. 2. Spilce into Beige/White wire (#6 on Body Control Module) passenger right side footwell. 3. Wire in all lights to the LUX Pro-Installer box….**** Depending on how many lights you install..you may have to double up wires as the...

Yesterdays…all day LUX Lighting install with their pro-installer box

Here are some pics!