Search results

I have a 2020 gladiator with the 2" Mopar lift. I like the way it rides and I tow maybe half time which I use airbags for and am happy with that. I need to replace the coil springs now. I am not interested in going with a heavier spring. I see Synergy which maintains a factory spring rate and...

2020 Gladiator - My coolant level has always been good. Cold level on tank then somewhere between there and full hot when warmed up. Now the tank is filling up to near full when running and then back to the cold level when off and cold. The idiot temp guage does not move off normal when warmed...

I changed my trans filter and fluid. It only took about 5 quarts. I saw a youtube that said 6 quarts. I was wondering what other folks results were. I already recycled the oil so I don't have that for a reference.

JCR Sliders good condition. Just add paint or powder and they'll be like new. Lake Elsinore area local pickup only

Stock JT Wheels with lug nuts and locks - Lake Elsinore area, local pickup only

Hi, reading up on changing the plugs on my 2020 glaadiator. Did anyone doing this change the Plenum seals. I'm just trying to get everything I might need before I get into it. I was also going to change the PCV valve based on several other recommendations. Thanks in advance

The last time I bought a 68257030AA it was $24. Less than a year later the cheapest one I can find is double that. Anyone know what's going on?

After I turn off the Jeep. My dirve shaft makes a pinging sound as it cools done. Does anyone else experience this? I had the driveshaft replaced early on with the recall.

I am new to mobile ham radio and was looking for an antenna mount. I found the Rugged Ridge https://www.ruggedradios.com/products/antenna-mount-for-jeep-jl-jk-tj-jt or https://topsyproducts.com/products/jl-fender-mount-nmo-antenna-bracket I am wondering if anyone has any experience with...

I changed my oil and the oil filter did not come out with the cap like I have seen on numerous videos. This is my third oil change. It is stuck in the cannister portion and needs pulled out. I have now tried several different filters and they do the same. My concern is that something is broken...

I can't find in the manual. Is the coolant level checked hot or cold. There is no distinction on the reservoir, only min and max.

5000 miles on Rubicon takeoff. Shocks, springs, etc. $300

17" spare steel wheel, rim only. Like new $25

5000 miles on Rubicon takeoff. Shocks, springs, etc. $350

I know this is not the "for sale" section but is there any market for the takeoff plastic bumper? I have listed it with no response but it also took a long time to sell other takeoff parts, so just wondering, location or no interest.

I installed the Mopar lift and took it to a local shop for alignment. The specs they use are different than the Mopar specs, the biggest being they use positive toe vs the Mopar spec for negative toe. Unless the lift radically changed the toe it was very positive before the alignment though...

$100 OBO located SoCal

Gladiator OEM Fabric Roll-up Tonneau Cover $300 located in SoCal

$150 Good condition loacted in SoCal

I am in the middle of installing the Mopar lift and wanted to confirm that the spacer on the top mount of the front shocks faces inwards. I don't believe it could even be mounted otherwise but I was confused by the picture in the instructions. Also anyone doing the lift and installing an...