Search results

Not sure what size wire you are planning to run, but you might try your local big box store or a decent hardware store. They should have cable glands of various sizes stacked up like cordwood and you can try them out in person...

Had these on my '21 Gladiator and really liked them: https://www.amazon.com/gp/product/B08N68P68G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Haven't decided what to go with on the '23 ?

Mine are 37-1/4" tall as measured with a level across the top of the tread at 28psi.

Another vote for and glowing review of the RSE step sliders. I skimped out a little on the build of my first Gladiator and didn't get the RSE steps, which made entry/egress a bit too much of a challenge for my personal tastes on a daily basis... This time however, the RSE steps were among the...

I'll be interested to see what you come up with. We do a lot of snow wheeling here in the PNW, and I share your concern with the under-mounted spare. Case in point, two weekends ago my buddy broke through the crust and found the creek bed below, and in the process lost both beads on the...

39" KO2s on 17x9 KMC's, not a wheel weight to be found and it runs out perfect up to 80mph ?‍♂️

Sunset on Darland Mountain in central WA 04Jun2023:

17x9 KMC's with 39" KO2's

One of my favorites in that area for sure. To the best of my knowledge the lake is the effective end of the 4x4 trail... There are a couple of hiking/dirtbike trails that continues in a Southerly direction down the other side of the drainage but it's not a legal 4x4 trail.

The most effective thing you can do is drive it... As Not2Late stated above, you'd be amazed at where it'll take you just as it sits, and I'd wager to say it'll take you everywhere you want it to. The rest is just eye candy until you are ready to cross a line.

Thanks fellas, truly appreciate the kind words.

Pretty basic front winch bumper that I fabricated over the weekend. It's two separate pieces consisting of the winch plate and the bumper shell: After some hot glue and paint: Still marinating some ideas for a lower valance/bash plate, but that's a project for another...

I wanted a cross bed toolbox but I didn't want to use one of the sloped-bottom boxes that clear the filler neck, so the only viable solution was to jack up the toolbox enough to clear. This left me with a cavity between the bedrail and the toolbox, in which I stashed a fire extinguisher on the...

Made my own hood and rear quarter graphics with some leftover matte black vinyl and some 3M stripe tape:

Hot spell here this week, headed for some elevation to try and cool off this weekend...

Finally got mine bolted up last night: Teraflex 3.5ST extended travel suspension and 17x9 KMC's with -12mm offset.

What is the width and backspace on your wheels?

Agreed, nicely done. I'm going to be work on a 60% version, primarily for my fridge.