RCA is good, continuity as expected. Power and ground at the camera.
Swapped pins to 24/25 - still blue screen.
Tested pins outside of the connector, they sit firmly.
Placed back in 21/22 and seated the brick connector firmly. Waiting for the unit to reset to show the settings again...
Agreed, that's about where I'm at if the settings are all good. The pins both clicked and I cannot pull them out, but I will double check, and triple check they're in the right orientation and location. Next step would be to turn on the side camera in Jscan and see if it pops up there. If it...
That's where I checked for 12v - the +line of the lighter harness that I have my camera + connected to. There's a -line in the lighter harness that I've tried both grounded and ungrounded, though the camera does have a body ground at the grill.
I can try double checking the 12v at the camera...
The icon is showing up in the menu, and when I'm in reverse, but selecting it just gives me the blue "camera not available" screen.
I feel like I'm so close, just can't figure out what I'm overlooking. Only thing it could be I guess is some conflict with the pin info, and I should either try...
Same. That helps rule out most wiring details, making me lean more towards not having the necessary settings through jscan.
Only thing I've done is activated the cargo camera/chmsl (which coincidentally also automatically activates front view camera/cargo camera.)
I feel like there's probably...
I'm trying to get a DIY front camera set up using the following items:
Camera: Natika backup/front camera
Power harness: ebay cigarette lighter pigtail
And RCA connector: zautomotive connector
I've installed roughly using zautomotive's instructions, using pins 21 and 22 of the radio (2021...
Not that I know what to look for, but I'm going in to add a forward cam next Monday (not ZAutomative, but a similar approach). I'll see if I can find something.