Search results

I love my bronze rocktrix 114s. Glad I went with these and the color is great

The seem kinda similar to my TuxMats, that I love. protection is great

Camping season is upon us, where I am at least, and I've done my first tow of my, new to me, 4000lb trailer. I'm running a 2.5 readylift (puck). Thinking I need to get some more support on the backend. Not sure if i should just go new springs, like claytons 2.5in lift springs, or do air...

no write up, didnt think about it. i did it in parts but the install for everything can easily be done in like an hour, if that. This is pretty much the kit I installed. https://www.haloview.com/byte-tango-7-plus.html though, i got the monitor and backup camera for 250 on amazon and then the...

Just did my first tow with the haloview side and rear camera. Very small delay but worked great. Hit construction with no shoulder and only concrete barriers all around. A little worried as it was my first time with anything over 1k lbs. It was nice having the side cameras as well as the tow...

Ever figure this out? Fix it? I was messing with mine yesterday since we are finally getting some fantastic topless weather, and remembered this post and took a quick pic of mine half open. If I remember, I'll see if mine opens and closes the same as your videos. Theres no issue closing. I...

Its funny, before i got my jku and then jt, I made fun of a buddy for buying a TJ with polished rims. "oh, who does shinny on a jeep?" but once I fell into the jeep hole, I felt bad, and realized my mistake. it looked really good.

And not this one. lol

Body armor 4x4. I waited to get their bed protector and step add-ons since the shop installed it while doing the repair. Need to grab some reverse cube lights too.

Excited to have my JT back after 3 weeks. Was rear-ended in Nov, my appointment was march but part on backorder until end of April... used it as a reason to get a new rear bumper and had them throw on the black jeep emblem instead of the silver

Run painters tape along the door/window seal on the exterior, put in pieces and slowly remove/drive/remove/drive until you find the location. I know what I have is not the normal jeep or soft top noise. It literally sounds like the window is open

only reason i didnt hear mine off the lot, i left with the soft top down. some had success changing the mirror plastic triangle piece, others door seal. i have to drop with front window as see if the foam is in there. just waiting for it to be nice again.

I had mine in the shop 4 different times and after the forth, Oh this is normal jeep noise. I laughed at them. I know normal noise, this is not it plus it goes away when I put tape at a specific spot on the door, pillar area. Ive had door seal, window seal and i replaced the triangle piece...

What do you do with the monitor? Attached to window? i was thinking of putting over my rearview. They have an attachment for the haloview. i assume furrion should as well.

Finished my haloview install and though I have nothing to compare to, and I know its more than others on amazon, but I'm extremely happy with mine. The wireless signal is clear, didnt seem like there was much, if any, of a delay and I can hear behind me. I wont get to try it on the road and...

i seemed to grab the last pair on amazon for the mirrors. havent seen them come back since i bought them, at least. Installed my backup camera today. - Haloview Byte Tango 1080P HD Wireless Observation Camera System BT7 - I removed my center marker light to put the camera there so I didnt...

2 weeks ago I installed the K-Source tow mirrors. they have been great. For my trailer, I picked up the haloview system. Going to install it this weekend. I like how it has not only the rear, but side marker cameras. It seems to get good reviews. - edited to uploaded pic of k-source

I ended up getting the K-Source mirrors after trying clip-ons. I felt like I was going to damage the mirror housing with the clamps but those K-source ones, man these should have been a factory option. Im not sure I'll remove them. Mine were tight. Not sure how hard it would be to remove...

Boy am I grateful my dealer, well, before it just was sold, used a great local shop. My parents had their hinges redone bc of bubbling and you cant even tell. Mines about to go to the shop to get a new bed panel installed/painted from someone rear-ending me. Ive waited since Nov bc I refused...

When you run top down, rear window out, does the window facing the JT side out as well?