Yes CEL flashes while it's misfiring, then stops once I restart the engine. If I drive easy (normal to me) it doesn't misfire, just under hard acceleration, like getting up to speed to merge onto the highway in a short distance.
We just got back from a 750 mile trip to STL and never had an...
I'm definitely replacing the plugs soon, and might as well grab a set of coils while I'm in there. If that doesn't work I'll just replace the heads. Then I'll have a new top end.
At 60k miles my Gladiator developed the "tick". Replaced cams and lifters and it's been great for the next 40k miles. Recently when excelerating hard, I'll develop a misfire and will have to completely shut off the engine for it to go away. From what I understand, this may be due to the lifters...
Do happen to have a 6 speed manual? I just had the clutch replaced last month and I assume some software updates as well. Wondering if the update might be the cause.
In, to see what others may offer. I've developed a bad misfire with obvious loss of power and stuttering when I'm trying to get to speed to merge onto the highway. If I'm careful, all will be well, but if I hammer down the misfires happen.
I just received new plugs from RockAuto and plan on...
I can't think of anything reason to drive with the door open, but if you're doing for something like backing up to a trailer, you can always unplug the harness so it thinks the door is off.
Thanks for the replies. I wrench on my own vehicles. Just changed out the thermostat on our QX60..all the bolts are blind, that was fun. I forgot about the VVT seals. One of mine is leaking.
Almost 100k miles on the 3.6l. Oil changes at 5k, air filters when needed, otherwise I haven't performed any other preventative maintenance on the engine. Any tips, tricks or suggestions? Ill go ahead and pick up a PVC valve.
I miss my old k5 blazer, I could stand in the engine bay and swap the...
I found a 8.4 radio but it comes with a dual climate panel. What are the odds that the guts for the dual climate are there and just not functioning due to the lower end controls?