Search results

My advice… stay away from multi bolt pattern wheels. Aligning 10 holes on a 5x5 configuration is quite cumbersome and tiring unless you mark the bolts.

Oil change and 37” 5 tire rotation, and cleaned all barrels with the help of my 6 year old son.

@ttn333 If u have any issues, GoRhino has stepped up their game on customer service. They helped me iron out some issues and offered to fix them. QC could use some work. Although packaged nicely, I did receive some parts scratched or spots that have missing powdercoat (I used mopar hard top...

I went with Bulletliner due to the convenience factor; Open on Saturdays.

Installed my front rigid setup (minus radiance lights) that was stolen a few months ago, installed my rigid reverse lights on my rack and installed my hi lift jack mount. I also added security screws and will be adding silicone on the bolt ends to prevent any further theft.

Installed the custom made brackets that GoRhino gave me for the hi lift jack, Installed my Rigid Reverse Lights, and (non rack related) installed my new, similar Rigid setup that was stolen from me a couple months back.

So… the hi lift jack bracket only works on one side. The drivers side. Unfortunately my drivers side has the table. I will have to remove it next week as I will make arrangements for them to fix my table (broken rivnut). Thanks GoRhino for your help in getting me a bracket but my setup is...

I don’t know about my decision but I purchased Spartan Rear bumper on impulse. I really don’t like RoadArmor products and customer service but I got a good deal. I don’t know how long it will be but I may change my mind.

@ttn333 so far so good with 2 camping trips. No noise at highway/offroad speeds but there is a rattle coming from my rotopax mount which I will investigate this weekend. I’ll also be checking the bolts too. I will be in OC this Sunday afternoon if u wanna check it out.

Bottom right nutsert

@thekorky I’ll be checking the rack this weekend. I did notice that a nutsert on the table did come apart. It’s still fully functional and GoRhino did offer me to send it in to fix it or bring it in. I’ll probably bring it in one of these days since they are an hour drive from my location, plus...

@WAJTRD the inner bed curves in giving no access for the foot mounts.

Have you considered Metalcloak Rocksports nitrogen based shocks? they run under 300 for the whole set. After having Biksteins on my many Jeep applications, I chose the rocksports since they came uniformed with my lift instead of mix n match. They also are compared to 5-6” lift shocks… they will...

GoRhino got back to me and they are putting my custom piece together. Great customer service as they are keeping me updated.

Cancelled my Rigid DSS spots as it is now a 2 month wait. Purchased the same lights from amazon and should have it by Thursday.

I also installed with everything loose until I did a final check when mounted.

@GeneralJT i don’t have the rail system and mine can only mount to 6 of the 8 supplied bolts. I have no issues with it as I drove through some 50mph gusts on highway speeds, and some slight Offroad (jarring dirt/gravel trail). It’s pretty secured. once u get the table, let us know what size...

@Bremen once u get it, let us know so we can assist you with a smooth install. With the rack, everything is pretty self explanatory once u get one upright bracket installed.

GoRhino reached out to me and offered a solution to my issue with the HiLift Jack. They will do a mock up and make some spacers for me. I do appreciate their response and assistance. I did bring up the issue with the side tables too as the bolts are too short. Hopefully they can revise their...

Yes I do have it and also the table. My issue is that I explained to GoRhino that I wanted to mount my HiLift jack on the inside using the 4core bars. They recommended the specific part, and that part doesn’t work.