Search results

In the long run, using heat gun will just make them crappyer.

NNNNNNNNNNOOOOOOOOOooooooooo

I ordered one (WarFab) hitch skid from Mid Atlantic Off Roading.

I ran 14 gauge wire to the battery. Put disconnect plug to back lights. 18 ga should be fine.

I can't find this on their web site :(. ????

I wanted a drop in liner. Thats all I ever had. My JT came with the spray in bed liner. Im glad it did. I really like it. It really is tuff. Spray bed liner on a aluminum soft drink can,, hold it in your hand and try to squish it. You cant.

Only ran hot wire to back up lights. Ground wire from lights are rounded to a small bolt on steel bumper. Under dash found a small bolt and grounded lighted toggle switch with a nut on small bolt under dash. Also used a disconnect at back in case I need to remove bumper.

Only ran hot wire back to back bumper. Put the ground off the light to a small bolt somewhere on or around the rear bumper. can't remember exact spot, I'd have to go look. Under dash some where I found a small bolt to put ground on from lighted toggle switch. also have disconnect at back...

Thats why I wired mine to a toggle switch. Can turn on off at my will.

I ordered harness , didn't receive, but I dont want it, would rather have refund on it. Thanks, Harry.

Yes I have the Kenda 35 x 10.5 on my JT. Fits perfect.

I received and installed mine today. No way would I wire them to the reverse lights. I ran wire from battery positive to rockeri switch I installed on dash on the removable panel under steering wheel. Ran positive wire in conduit to back bumper and wired lights up Ground to bumper bolt. Reason...

My JT is beautiful..

How the airbags work is not from the vertical up and down pressure. They work from the horizontal pressure pushing against the springs making the spring stiffer.

I have airlift 1000 kit made for JT in my JT. Have on order 2.5" Claton lift. some guys are putting the airbag for Dodge truck in lifted jeep with spacers. The Dodge bag is a little more narrow than the JT bag. These bags work with the pressure going out against the springs, Not up and down...

How are ye making the spacer ??? fixing to lift my JT and will need more spacers. I ordered bags 60818-HD but they still are not going to be tall enough... ??

If you already have the springs installed all ye have to do is measure inside the spring up and down. Then The Airlift company can recommenced a proper size bag... I been looking for someone who has Clayton 2.5" springs to get me that measurement because I have that lift kit on order. Would...

I have the Airlift 1000 in my rear springs on stock Sport S. Fixing to install a 2.5” Clayton overland plus lift kit. Does anybody have a airlift kit installed with that lift that can tell me witch Airbag will properly fit or can measure the rear springs on laden truck from top to bottom space...

Thanks.

For you Jeepers running the Kenda 35x10.5 RT. On 17” stock rim. What air psi you run in them?