Search results

They should also be removing the door handles and any other trim pieces, if not you end up with a tape edge that will lift off in the future.

they told me last year they where staying with cb’s due to the number of channels needed

So after 40k miles getting a little bouncier than I like. There seems to have been a lot of people that were going with the Clayton 1.5 leveling kit and Icon 1.5 triple rate springs in the back. At least some early shock recommendations seem to be Bilstein 5100's. I usually run at max payload...

Your weight concern is understandable but unfortunately I think everyone pretty much ignores it. Unloaded (no camping gear), with just myself, diamondback cover, Billie Bars rack, and awnings I weigh in at about 6000lbs. Only other mods are stubby bumper and winch. The diamond back is pricey...

you might be able to start with a roll cage kit...

About 10 years ago scored some LED's for WAY under what they should have gone for. The venders has set up their system to price compare with other sites and automatically reduce their price accordingly without human verification. Ordered at midnight, it got in their shipping que before they...

Gaia app is also worth it, you can download maps and Tracks to follow when you don’t have cell coverage. it’s saved me a few times.

Did Fins in a stock JTR, dragged a few times. I used a hitch skid since I also tow, not worried about the hitch, more the chain loops. I still highly recommend Shafer if the weather permits. And Long canyon is a great photo op. Can get rough above the rock. Based on your profile, are you...

Out Long Canyon back Potash via Shafer is a nice loop. Yurts at Dead Horse Point State Park are nor bad if they are available.

To give you a cheap option, I pulled my rubi sliders off and put on the factory steps. The factory steps sell used around here from free to $75 so I have a spare set and if I trash them I'll just pop on a new one. But I am careful with my line and watch what I am doing. The convenience of a...

Nice of Tire Rack to do that... most OEM's do not accept tires that have been ground and they end up in the replacement market. Nothing wrong with them, just not ideal. We even banded sets of four or five so that all of their characteristics matched, conicity was a big one. Hard to match the...

Looking for a factory spare steel wheel in the Charlotte NC area. Using it on my 416 trailer... Thanks

down from Moab, just the main overlooks on the north rim. That pic was down a forest service road somewhere on the east side, not sure if it had a name. Got dark before we could get to sublime point so had to turn back.. :(

sending PM

North Rim GC

No drilling depending on the rack

How large an awning? I have used a Thule gutter mount but only spanning the back of the top, not the removable panels. I have my 4' arb on one side and shower on the other. My large awning, 8', is on the back bed, not sure I would be comfortable with its weight and possible wind loading on the...

Diamond back, not too bad to take off and put back on. Load bearing. Have had some issue with leaks but I think its an issue with also having the Billiebars installed.

Wonder which one most would prefer…

Thanks! sold out :(