Search results

For those who purchased this and install on the Mojave, how high did it officially raise? I was told by most people that it raise up to 3". If yes, did you still have to install front driveshaft because factory driveshaft is too short for 3" lift?

Anyone order one and got one or more terminal expansion that are kinda rusted or burn metal (got one on negative terminal). See picture and video attached. Please post picture if you have one and what did you do? I emailed to them with picture and no respond, I send them twice. All I ask for is...

After replacing with new axle, do it need alignment? I notice that steering wheel is off-center, about 35 degree counter-clockwise when driving straight.

Need your help, I am little confuse with one thing. I know the process of changing transmission oil. Once oil is filled, start the jeep and warm up tranny oil to at least 86 degree and do the gear shift from R, N D, 2nd gear, rev 2,000 rpm and then do the oil check again. But what really confuse...

I have 30k miles and did some hard off-roading and thought might be time to change oil. I will install PPE trans pan and I know I will add 1.5 qt. more than stock. Changing oil from factory oil to Amsoil, will that give tranny issue with different brand of oil??

Planning to change transmission pan from factory to PPE, for those who have done it, what's the oil capacity once you install PPE pan? Not sure if 8 quarts will be enough as I will order online. Thanks

I have 2022 Mojave 3.6 and automatic. Occasionally when I start driving from stop, gears shift to second and stay till engine rev high before going to 3rd. I have 30,000 miles on it and told Jeep dealership, they diagnosed and see nothing wrong with transmission. Does anyone experience that...

I am looking to get Skid Plate as I will often go to Moab and other places. Which brand do you recommend and why? I am looking into Metalcloak but not sure.

I know there's 2-stage oil pressure but on my Mojave, (low) below 3,000 rpm read 31 pounds and above 3,000 rpm (high) read 81 pounds. Is the high too much pressure for my Mojave? I am using 0W-20 oil and its been like that since came out of factory. Now has about 25k miles on it. I change my oil...

I live in Arizona and in summer, temp goes up to about 115, but in winter, temp goes up to about 65 and low's to about 35. Do you think overall, changing the oil viscosity from 0W-20 to 5w-30 make it better for the engine, or worst. And why?