My local FEDEX bent and damaged the rails by mishandling the box. Granted, it is a heavy box.
All is good. BAK Industries is taking care of me. Thanks to Alex @RealTruck for assisting as well.
Everyone, just dont forget to snap a photo of your serial number located on the box and...
When I had my TSB done for my steering, the next day I installed the Synergy Steering/Trackbar brace and noticed the pitman nut was hand tightened only.
Check the torque on all nuts and bolts of your front end. I did since I installed my lift kit on my own. There were a few bolts not torqued...
This. I am running 37 Patagonias on my Rubicon and I didnt have a lift at one point. No rubbing at all on-road. However, the moment I disconnected the sway-bars I rubbed. I then installed Teraflex 1.5" leveling kit and with the included 1" bumpstops, I was fine. No rubbing at all. This...
With highline fenders like the Rubicon, then yes. On a Sport or Overland, not bad looking at all. I have a Rubicon with a Clayton 3.5 lift and 37" tires. I kind of wished I went 38" now.
Setting your tire size is trial and error using the Tazer. I have 37 Pats and they measured 35.5" with the full weight of my Gladiator. However, I had to set my tire size to 36.6 in the Tazer to match the speed of my GPS' (phone and dash cam).
As noted above, if using your phone as a source...
Found them. Thank you very much!
Complete set:
https://realtruck.com/p/rhino-rack-aero-topper-racks/rhr-y02-490b-nt/
(Optional Crossbars for Track Mounted Rack | Black & includes 59" black cross bars)
Just the quick mounts/legs...
Could you be so kind and tell me the exact Rhino Rack pieces included in the rack system you are using?
Looks like there a total of three seperate pieces - pad/base that attaches to the T-rails, Tower, and then crossbars themselves. Is this correct? Are there taller options to allow the X4S to...
@RealTruck Can we use the same integrated rail system used on the Bakflip CS/F1? Looks like the crossbar mounts are attached to the tonneau cover using the t-rails built into the tonneau cover's side rails.
If so, would be nice to have an option for a lower profile crossbar mounts.