Your caster is probably a little high. Try driving in 4WD down the road and you’ll likely get a vibration around 45MPH due to the pinion angle unless you’ve changed drive lines. I miscalculated my caster and got a vibration in the drive line and I was about 8 degrees. I have my caster at just...
thanks, great info for next time, wish I could have waited but the Control arm on my wife’s gladiator is clunking and moving around a bit and I need to replace it asap. I tried the RC x flex control arms and they were great for a year but the heim joint is now giving out. Lesson learned, buy...
The flat link is a slightly brighter orange than the Mojave decal orange. Not really noticeable (unless your my wife) because they are far enough apart. I am considering getting the flat link powder coated along with the rim center rings to more of a burnt orange to match the interior trim...
Wife, kids and I took the Mojave on “hell’s revenge” last week as we were driving through Moab. Super fun for the whole family. The Mojave did great, better than anticipated. To be fair we did skip the escalator and the hot tubs but we had a great time.
I couldn’t stand long road trips with the 4:10 gears with 37’s, I was constantly putting the transmission in manual to get the right gear and 8th gear was mostly non existent. I went with 5:13’s and very pleased.
To be fair I had no issues with 37’s and 4:10’s around town it wasn’t an issue.
I finally installed the drop bracket. I went to Home Depot and bought longer grade 8 bolts. I cut up a steel tow hook that was about an 1” thick and used it as the spacer for the drop.
fab fours front Lifestyle bumper smittybilt winch and factor 55 flat link. Reused the Mojave skid plate but had to shift it down and use the lower holes to mount it back up. A little gap on the sides but acceptable.
My wife finally got all the parts she ordered for her Mojave. I’ll be busy installing parts over the next few weeks.
FabFours front and rear bumpers, FabFours step sliders, Smittybilt winch and a teraflex 2” lift with new control arms, trackbar and shock extension.
Having a hard time finding...
I haven’t installed my lift yet, I was thinking about adding the carrier bearing drop and will probably add it at some point. I might just head down to Home Depot and build up my own drop bracket. I still need to find a rear trackbar bracket. I can’t get the tires I want from Nitto so I...
I called teraflex and ordered a 1.5 inch lift spacer for the rear springs in addition to the .5 spacer from the kit I bought. I think they were 50 dollars. I can go up 2.5” in the front and 2.0” in the rear. Are you going to add a carrier bearing drop to the drive shaft?
I’m doing a 2” Lift on my Mojave and just finished ordering all the part. I’ll be using a 2.5 inch tereflex spacer lift an only use the 2” pucks up front. I’ll lift the back by 1” using the pucks. I bough lower control arms and a new trackbar for the front. I also ordered Fabtech shock...